$999.99 Free Budget Shipping
EARN 1000 RAKUTEN SUPER POINTS™
What are Rakuten Super Points™?
Get rewarded when you shop! Earn 1 point per dollar spent. That's like getting cash back on every purchase. Easy to see matured points in checkout. Use points just like cash.Learn More
Condition: Brand New
|The ADJ Mega Bar 50RGB RC is a compact 22"(1/2m) LED lighting Bar that offers the power of RGB color mixing for stage or wall washing. The Mega Bar 50RGB RC features an infrared wireless remote to control what would normally require a DMX controller or adjustments made by hand on the rear panel. Aim the wireless remote at the unit and control features such as: black out, built-in programs, flash, DMX addressing, and RGB color change.This fixture uses LEDs rated at 100,000 hours with a maximum power draw of 30W. DMX addressing may also be changed by the unit's 4-button LED display. There is no duty cycle on the Mega Bar 50RGB RC, plus users can daisychain the power from one unit to the next with the built-in IEC power ins/outs.Mega Bar 50 RGB light1.5'/.5m ultra bright, indoor LED Color Bar with 125, 10mm LEDs (24 Red, 54 Green, & 47 Blue LEDs)Includes wireless infrared remote control up to 30'/10m (Model: ADJ LED RC)7 DMX Channel modes: 1-, 2-, 3-, 4-, 5-, 6-, & 7-channel modes7 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode; RGB Manual Control Mode and DMX-512 ModeGreat as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performersSmooth RGB color mixing (fast or slow color change operation)32 built-in Color MacrosColor strobe effectDMX-512 ProtocolElectronic Dimming: 0 - 100%Beam angle: 40-degreeLinkable via 3-pin XLR cable4-button LED display on rear panelIEC AC outlet on rear to daisy chain powerIncludes mounting bracketsLong-life LED (Rated at 50,000hrs.)Low power consumptionVery low heat outputRun all night with no duty cycleADJ LED RC Infrared Remote ControlBlack Out: Turns fixture On/OffAuto Run: Automatically run through built-in programsProgram Selection: Access units built-in programsFlash: Strobe effectSpeed: Control speed of Auto RunSound Active: Activates sound active modeSlave: Designates the fixture as a "slave" fixture in the Master/Slave configurationSet Address: Set DMX Address on a fixtureRGB Buttons: Adjust RGB colors with the "+" and "-" buttons+ and Buttons: Adjust flash rate, speed of the Auto Run and Program Selection|