Be the first to review this item and earn 25 Rakuten Super Points™
Save time! Run this SVGA cable easily through conduit over 1 inch in diameter!
SVGA cables can be very difficult to install due to the size of the HD15 connector. One alternative has been for installers to cut the connector off one end of the cable, and then re-terminate once the cable is in place. The unique design of our Break-Apart SVGA cable allows an installer the ability to remove the HD15 connector and easily pull the cable through a conduit as small as 1 inch in diameter. Once the cable is through the conduit, plug the (#40247) pigtail into the cable (sold separately), and connect the video device. The cable construction is three coaxial cables plus three 26AWG twisted pair plus two 26AWG conductors. Thus, in most cases, video can be transmitted unamplified up to 100 feet and 150 feet with booster. Double shield and ferrites ensure noise-free signal transmission. These cables are ideal for a wide range of applications including offices, schools and home theater.
No need to re-terminate the connector after installation Ideal for home theater, schools and offices NOTE: The break-apart cable has a proprietary round connector on it that plugs into a mating connector on the pigtail, part # 40247. You must buy both pieces together (# 40243 and # 40247) in order for the cable to work. The end result is a 15-pin VGA male/male cable that is much easier to run through conduit or small spaces.
Connector on First End
1 x 15-pin HD-15 Male
Connector on Second End
1 x Female Proprietary
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
5% Back* Sitewide with Promo Code Rewardme
*See page for details