Be the first to review this item and earn 25 Rakuten Super Points™
This power system is ideal for powering a stack or rack mounted set of any mix of these products in the NetBeyond extended network system of modular, stackable LAN and WAN products. It is flexible and cost-effective in addressing the uptime requirements of these offices by offering two levels of redundancy: quasi-redundant mode and fully redundant mode.
In quasi-redundant mode, the RPS can support four load units. In this configuration, the mean time between failure (MTBF) of the RPS substantially exceeds that of the power supply in the individual external devices (hubs, switches, routers and access servers). In fully redundant mode, the RPS can support two external devices with a special cable offering extremely high uptime. Individual external devices can be hot inserted without affecting other external devices in either configuration.
The RPS supports both local and remote monitoring of status. Front panel LEDs allow a quick local check of status for AC input power, DC output power, cooling fans, and system temperature. When one of the external devices that the RPS powers is a Cisco 3600 Series, the Cisco 3600 can receive and store status signals from the RPS. In turn, the RPS status stored on the Cisco 3600 series is available for remote monitoring via Simple Network Management Protocol (SNMP) products such as CiscoWorks.
The 600-watt Redundant AC Power System (RPS), the PWR600-AC-RPS, is a separate chassis that provides redundant power for any combination of up to four of the following products: Cisco 4000 Series routersCisco Catalyst 4908G-L3 switchCisco Catalyst 4912G switchCisco MC3810 Multiservice Access ConcentratorCisco 3600 Series access server/routersCisco Catalyst 2948G-L3 switchCisco Catalyst 2948G switchCisco 2600 Series routersCisco 2500 Series routersCisco 2500 Series access serversCisco Catalyst 2900 Series XL Ethernet switchesCisco Catalyst 1900 Series Ethernet switchesCisco Catalyst 2820 Series Ethernet switchesFastHub 300 Series 100Base-T hubsFastHub 200 Series 100Base-T hubFastHub 100 Series 10/100Base-T hubHP 10Base-T Hub-16M
5 V DC / 12 V DC / -12 V DC
240 V AC
AC input power DC output power Fan Temperature
0 ft to 10000 ft Operating / 0 ft to 30000 ft Non-operating
10% to 85% Non-condensing Operating / 5% to 95% Non-condensing Non-operating
32°F (0°C) to 104°F (40°C) Operating / -4°F (-20°C) to 149°F (65°C) Non-operating
Redundant Power Supply
Manufacturer Part Number
Manufacturer Website Address
Cisco Systems, Inc
600 watt Redundant AC Power Supply
Normal operating noise level: 48 dBA Output power: 150W per module (maximum) Absolute maximum input: 1000W Two redundant modes: quasi-redundant, and fully redundant Support of up to four of any combination of 150-watt external devices (hubs, switches, routers, and access servers) Hot insertion of external devices Dual AC inputs and power cords Two fully redundant AC input power modules Four DC output power modules Four one-to-one DC power cables (in model PWR600-AC-RPS-CAB) Front panel LEDs for AC input power, DC output power, fan, and temperature status Redundant cooling fans Remote monitoring using SNMP via a Cisco 3600 series 19 in. rack-mount kit included (24 in. optional) The RPS itself requires no software. When the RPS is powering a Cisco 3600 Series access server/router, the Cisco 3600 must be loaded with Cisco IOS Release 11.2(7)P or later
The 600-watt Redundant AC Power System (RPS), the PWR600-AC-RPS, is a separate chassis that provides redundant power for any combination of up to four of the following products: Cisco 4000 Series routers Cisco Catalyst 4908G-L3 switch Cisco Catalyst 4912G switch Cisco MC3810 Multiservice Access Concentrator Cisco 3600 Series access server/routers Cisco Catalyst 2948G-L3 switch Cisco Catalyst 2948G switch Cisco 2600 Series routers Cisco 2500 Series routers Cisco 2500 Series access servers Cisco Catalyst 2900 Series XL Ethernet switches Cisco Catalyst 1900 Series Ethernet switches Cisco Catalyst 2820 Series Ethernet switches FastHub 300 Series 100Base-T hubs FastHub 200 Series 100Base-T hub FastHub 100 Series 10/100Base-T hub HP 10Base-T Hub-16M
Certifications & Standards
Regulatory compliance: FCC Class B
3.44" Height x 17.50" Width x 16" Depth
240 V AC
5 V DC / 12 V DC / -12 V DC
50 Hz to 60 Hz
Input Voltage Range
100 V AC to 240 V AC
90 Day Limited
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
5% Back* Sitewide with Promo Code Rewardme
*See page for details