Cisco Catalyst 4908G Ethernet Switch

The Catalyst 4908G-L3 switch is a fixed-configuration Layer 3 (L3) Ethernet switch featuring wire-speed switching for IP, IPX, and IP multicast. This new Catalyst switch provides the high performance that is required for mid-size campus backbones with just the right port density. It is ideal for aggregating multiprotocol traffic from multiple wiring closets or workgroup switches such as the Catalyst 2900, Catalyst 3500, Catalyst 4000, or Catalyst 5000 switches.

Features

	Port/Expansion Slot Details	8 x Gigabit Ethernet Expansion Slot
	Product Type	Ethernet Switch
	Manufacturer Part Number	WS-C4908G-L3
	Manufacturer	Cisco Systems, Inc
	Product Model	4908G-L3
	Product Name	Catalyst 4908G Ethernet Switch
	Product Line	Catalyst
	Product Series	4000
	Brand Name	Cisco
	Expansion Slot Type	GBIC
	Number of Total Expansion Slots	8
	Standard Memory	64 MB
	Weight (Approximate)	18.00 lb
	Height	2.7"
	Width	17.1"
	Depth	18.0"
	Input Voltage	110 V AC
220 V AC
	Manageable	Yes
	Limited Warranty	90 Day

Tech Specs

	Status Indicators	Link up Link down
	Altitude	Up to 9842.52 ft Operating
Up to 10000 ft Operating
	Humidity	10% to 85% Non-condensing Relative Humidity Operating
	Temperature	32°F (0°C) to 113°F (45°C) Operating
-4°F (-20°C) to 149°F (65°C) Storage
	Product Type	Ethernet Switch
	Manufacturer Part Number	WS-C4908G-L3
	Manufacturer Website Address	www.cisco.com
	Manufacturer	Cisco Systems, Inc
	Product Name	Catalyst 4908G Ethernet Switch
	Product Line	Catalyst
	Product Series	4000
	Brand Name	Cisco
	Expansion Slots	(8 Total) GBIC
	Number of Expansion Slots	8
	Connectivity Media	Serial Cable RS-232
	Performance	22Gbps Backplane Speed
11Mpps Wirespeed Performance For 64-byte Packet
1.488e+06pps Forwarding Rate For 64-byte Packet 1Gbps Port
	Flash Memory	16 MB
	Standard Memory	64 MB
	Additional Information	Item Included: Power Cord,110V (CAB-AC) Cisco IOS cat2948g-L3 BASIC SOFTWARE FOR L3 CATALYST 2948G (SC29Z-12.0.14W) Y2K compliant Eight ports of 1000BaseX Gigabit Ethernet with gigabit interface converter (GBIC) support, all ports with Layer Three switching capability at wire speed High Performance - over 11 Mpps Layer Three Switching and Routing of IP, IPX, and IP Multicast High Performance CPU with Cisco IOS system software Quality of Service (QoS) - multiple queues with Weighted Round Robin (WRR) scheduling Comprehensive management tools based on standard CiscoWorks2000 applications Access List Support on all ports
	Certifications & Standards	Safety Certifications: UL 1950 CSA 22.2 No. 950 EN 60950 IEC 950 AS/NZS 3260, TS001 CE Electromagnetic Emissions Certifications: FCC Part 15 Class A EN 55022B Class A (CISPR 22 Class A) VCCI Class A AS/NZS 3548 Class A BCIQ CE Marking - IEEE 802.3x full duplex 1000BaseX ports IEEE 802.1D Spanning-Tree Protocol IEEE 802.1Q VLAN IEEE 802.3z 1000BaseX specification 1000BaseX (GBIC) 1000BaseSX 1000BaseLX/LH 1000Base ZX
	Dimensions	2.69" Height x 17.10" Width x 18" Depth
	Weight (Approximate)	18 lb
	Color	Black
	Input Voltage	110 V AC
220 V AC
	Frequency	50 Hz to 60 Hz
	Power Consumption	175 W @
	Input Voltage Range	100 V AC to 120 V AC
	Processor	1 x MIPS R5000 RISC
	Protocols	PIM
IGMP
CGMP
HSRP
IGRP
RIP
IPX/SPX
BootP
NetBIOS
SAP
GDP
IRDP
TCP/IP
BGP
ICMP
TFTP
DHCP
EIGRP
OSPF
	Management	SNMP Management Information Base (MIB) II
	Manageable	Yes
	Operating System	Cisco IOS cat2948g-L3 BASIC SOFTWARE FOR L3 CATALYST 2948G (SC29Z-12.0.14W)
	Standard Warranty	90 Day Limited

BloomReach Content

Cisco Catalyst 4908G Ethernet Switch - 8 x GBIC - Refurbished - WSC4908GL3

Product Details:

Rakuten