Cisco CISCO 575 LRE Transceiver & Media Converter

The Cisco 575 LRE Customer Premise Equipment (CPE) is a low-cost, compact device that bridges Long-Reach Ethernet (LRE) and Ethernet traffic. It supports Plain Old Telephone Service (POTS) traffic, including digital phones, that co-exists over the same LRE line. The Cisco 575 LRE CPE operates only with the Catalyst 2900 LRE XL & Catalyst 2950 LRE Series switches as part of the Cisco Long-Reach Ethernet networking solution.

Cisco 575 LRE CPEs can be monitored remotely using Cisco Switch Clustering technology, which allows users to configure, upgrade, and troubleshoot up to 16 devices from a Web browser and single IP address.

Features

	Number of Network (RJ-45) Ports	1
	Network (RJ-45)	Yes
	Total Number of Ports	3
	Product Type	Transceiver/Media Converter
	Manufacturer Part Number	CISCO575-LRE
	Manufacturer	Cisco Systems, Inc
	Product Name	575 LRE Transceiver & Media Converter
	Brand Name	Cisco
	Media Type Supported	Twisted Pair
	Network Technology	10/100Base-TX
	Ethernet Technology	Fast Ethernet
	Weight (Approximate)	8.00 oz
	Height	1.7"
	Width	1.7"
	Depth	6.0"
	Limited Warranty	Lifetime

Tech Specs

	Status Indicators	READY-CPE link to switch present ACT-Ethernet activity ETH-Ethernet link present POWER-Power indicator
	Interfaces/Ports	1 x RJ-45
2 x RJ-11
	Number of Ports	3
	Altitude	Up to 10000 ft Operating
Up to 15000 ft Storage
	Humidity	10 to 85% Non-condensing Relative Humidity Operating
	Temperature	32°F (0°C) to 113°F (45°C) Operating
-13°F (-25°C) to 158°F (70°C) Storage
	Product Type	Transceiver & Media Converter
	Manufacturer Part Number	CISCO575-LRE
	Manufacturer Website Address	www.cisco.com
	Packaged Quantity	1
	Manufacturer	Cisco Systems, Inc
	Product Name	CISCO 575 LRE Transceiver & Media Converter
	Brand Name	Cisco
	Connectivity	Twisted Pair
	Connectivity Media	10Base-T Category 3, 4, 5 Twisted Pair
100Base-TX Category 5 Twisted Pair
	Additional Information	Mean Time Between Failure (MTBF)-Predicted: 943,831 hours Power Requirements: DC input voltages 5V @1A Performance: Configurable maximum transmission unit (MTU) of up to 1,536 bytes Converts LRE to 10/100BASE-T Ethernet VDSL Plan 998 Not interoperable with Cisco Catalyst 2950 LRE 997 Switches Dimensions and Weight (H x W x D): 1.7" (43.2 mm) x 5.0" (127 mm) x 6.5" (165 mm) (with cable guard) 0.5 lb (0.2 kg) (with cable guard and no cables)
	Compatibility	Operates only with the Catalyst 2900 LRE XL & Catalyst 2950 LRE Series switches
	Certifications & Standards	Safety Certifications: UL 1950/CSA 22.2 No. 950 IEC 950/EN 60950 AS/NZS 3260, TS001 CE mark CCC Electromagnetic Compatibility Certifications: FCC Part 15 Class EN 55022 Class B (CISPR 22 Class B) VCCI Class B AS/NZS 3548 Class B CE Mark BCIQ CCC, - IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX ports IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification RMON I and II standards Y2K compliant
	Network Technology	10/100Base-TX
	Dimensions	1.70" Height x 1.70" Width x 6" Depth
	Weight (Approximate)	8 oz
	Input Voltage	5 V DC
	Protocols	TCP/IP
VoIP
	Management	IF-MIB (RFC 1573) support for CPE Ethernet ports (read-only) RMON-MIB (RFC 1757) support for CPE Ethernet ports (read only)
	Standard Warranty	Lifetime Limited

BloomReach Content

Cisco CISCO 575 LRE Transceiver & Media Converter - 1 x RJ-45 , 2 x RJ-11 - 10/100Base-TX - CISCO575LRE

Product Details:

Rakuten