Cisco IP Communications High-Density Digital Voice/Fax Network Module - NM-HDV2=

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment such as private branch exchange (PBX), key systems, analog telephones, and fax machines.

Supports a VIC/VWIC slot that can be populated with either digital or analog/BRI voice/WAN interface card. Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.

Specifications

Manufacturer Cisco
Mfg Part# NM-HDV2=
SKU 10374590
UPC 746320832111
UPC 14 00746320832111
Features
Product Type Network Module
Manufacturer Part Number NM-HDV2
Manufacturer Cisco Systems, Inc
Product Model NMHDV2
Brand Name Cisco
Expansion Slot Type VIC / PVDM / VWIC
Product Name IP Communications High-Density Digital Voice/Fax Network Module
Number of Total Expansion Slots 5
Compatibility Supported Platforms:384538253745372526912600XM Series281128212851
Application/Usage Data Networking
Tech Specs
Status Indicators EN PVDM 0 PVDM 1 PVDM 2 PVDM 3
Interfaces/Ports Not Applicable
Interfaces/Ports Details Not Applicable
Humidity 5% to 85% Non-condensing Relative Humidity Operating / 5% to 95% Non-condensing Relative Humidity Non-operating
Temperature 32°F (0°C) to 104°F (40°C) Operating / -13°F (-25°C) to 158°F (70°C) Storage
Product Type Network Module
Manufacturer Part Number NM-HDV2=
Manufacturer Website Address www.cisco.com
Manufacturer Cisco Systems, Inc
Product Name IP Communications High-Density Digital Voice/Fax Network Module
Brand Name Cisco
Expansion Slots 1 x VIC/VWIC
Daughter Cards Not Included
Additional Information Voice & Fax Integration Network module contain four 80-pin SIMM sockets for PVDM2s Toll Bypass Support Telephony Interface Signaling Support Cisco SRST maintains basic telephony services at the branch office even if Wan goes down This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec The module is Interoperable with the full range of Cisco IP Communications solutions
Compatibility Supported Platforms: 3845 3825 3745 3725 2691 2600XM Series
Certifications & Standards FCC Class B device EMC 47CFR15 Subpart B 2002, T1 Safety IEC60950 Telecom 47 CFR part 68, TIA/EIA 968-A
System Requirements Software and Memory Requirements: Cisco 2600XM: IP Plus images and higher 64 MB DRAM 32 MB Flash Cisco 2691: IP Plus images and higher 128 MB DRAM 32 MB Flash Cisco 3700: IP Plus images and higher 128 MB DRAM 32 MB Flash Supported Platforms & Minimum IOS Versions: 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.3(7)T 3725 - 12.3(7)T 2691 - 12.3(7)T 2600XM Series - 12.3(7)T
Protocols SNMP / VoIP / VoFR / VoATM / MGCP / SIP
Management Cisco Voice Manager SNMP protocol compliant Manageable via a MIB browser CiscoView interface for configuration ConfigMaker NetSys supported
Application/Usage Data Networking
Standard Warranty 90 Day Limited
loading
Sold Out
Sorry, you missed the deal!
This product is currently not available.
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details
ADVERTISEMENT
ADVERTISEMENT