Cisco RV 120W Wireless-N VPN Firewall

COMPUTERS

NETWORKING

SECURITY HARDWARE

FIREWALL/VPN APPLIANCES

Product Guides

Click Here for the Cisco Small Business Store

Cisco® RV 120W Wireless-N VPN Firewall combines secure connectivity—to the Internet, site to site, and remote access—with a high-speed, 802.11n wireless access point, a 4-port switch, and an intuitive, browser-based device manager, along with support for Cisco FindIT, a free network discovery utility.

Features

	Proven firewall, advanced wireless security
	IPsec support with hardware acceleration for site-to-site and remote-access VPN connections
	Built-in high-speed 802.11n wireless access point
	Support for separate virtual networks, enabling secure wireless guest acccess
	Integrated 4-port 10/100 Mbps switch with support for VLAN and QoS
	Simplified configuration through an intuitive browser-based device manager
	Support for Cisco FindIT Network Discovery Utility

Tech Specs

	Standards: IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless quality of service [QoS]), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
	Ports: Ethernet, power
	Switch: Power switch (on/off)
	Buttons: Reset
	Cabling type: Unshielded twisted pair (UTP) Category 5e or better
	Operating system: Linux
	NAT throughput: 100 Mbps
	Concurrent sessions: 1000
	VPN throughput: 25 Mbps
	Web user interface: Simple browser-based configuration (HTTP/HTTPS)
	Management protocols: Web browser, Simple Network Management Protocol (SNMP) version 1, 2c, 3, Bonjour, Universal Plug and Play (UPnP), Simple Network Time Protocol (SNTP)
	Event logging: Local, syslog, email alerts
	Upgradability: Firmware upgradable through web browser, imported/exported configuration in text format
	Spec/modulation: Radio and modulation type: 802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM
	Channels: Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
	External antennas: 2 (omnidirectional)
	Transmit power: 802.11b: 17 dBm+/- 1.5 dbm; 802.11g: 15 dBm+/- 1.5 dbm; 802.11n: 12.5 dBm+/- 1.5dbm
	Antenna gain in dBi: 1.8
	Receiver sensitivity: 802.11.n: 270 Mbps at -71 dBm, 802.11.g: 54 Mbps at -74 dBm, 802.11.b: 11 Mbps at -90 dBm
	Active WLAN clients: Up to 64 clients
	Access control: IP access control lists; MAC-based wireless access control
	Firewall: Stateful packet inspection (SPI) firewall
	Content filtering: Static URL blocking or keyword blocking
	Secure management: HTTPS, username/password
	WPS: Wireless Protected Setup
	802.1X: Port-based RADIUS authentication (Extensible Authentication Protocol [EAP] MD5, Protected EAP [PEAP])
	Channels selection: Auto channel selection
	Wireless isolation: Wireless isolation between clients
	Prioritization types: 802.1p port-based priority on LAN port and application-based priority on WAN port
	Queues: 4 queues
	VLAN support: Port-based and 802.1Q tag-based VLANs
	Network protocols: Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent, Static IP, Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), Spanning Tree Protocol (STP), Dynamic DNS (DDNS) (DynDNS, TZO)
	Number of VLANs: 4 active VLANs (1-4096 range)
	Multiple SSID: Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks
	Wireless VLAN map: Supports SSID to VLAN mapping with wireless client isolation
	U-APSD: Wi-Fi Multimedia (WMM) power save
	WMM: Wireless multimedia with QoS (802.1e)
	Wireless Domain Services (WDS): Allows wireless signals to be repeated by up to 2 compatible repeaters
	NAT protocol: Port Address Translation (PAT), Network Address Port Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG) support, NAT traversal, one-to-one NAT
	Network edge (DMZ): Software configurable on any IP address
	IPv6: Dual-stack IPv4 and IPv6, 6-to-4, stateless address auto-configuration, DHCP v6, Internet Control Message Protocol (ICMP) v6
	VPN:
	10 QuickVPN tunnels for remote client access
	10 IPsec site-to-site tunnels for branch office connectivity
	Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption
	MD5/SHA1 authentication
	IPsec NAT traversal
	VPN pass-through of PPTP, L2TP, IPsec
	Routing:
	Static and RIP v1,v2
	Inter-VLAN routing
	Power: 12V 1A
	Certification: FCC class B, CE, IC, WiFi
	Operating temperature: 0º to 40ºC (32º to 104ºF)
	Storage temperature: -20º to 70ºC (-4º to 158ºF)
	Operating humidity: 10% to 85% noncondensing
	Storage humidity: 5% to 90% noncondensing
	Warranty: 3 years

BloomReach Content

Cisco RV 120W Wireless-N VPN Firewall - RV120W-A-NA

Product Details:

Rakuten