Cisco Voice/Fax Network Module

This voice/fax module provides two T1 connections with drop and insert and support for 48 channels of medium complexity voice compression using any of the following VoCoders; G.711, G.729a/b, G.726, and fax. This module can also be used to provide 24 channels of high and/or medium complexity voice compression split between the two T1 ports using any of all of the following VoCoders; G.711, G.729, G.729a/b, G.726, G.728, G.723.1, and fax. The NM-HDV-2T1-48 consists of a network module, voice interface card, and digital signal processors.

Features

	Interfaces/Ports Details	2 x RJ-48 Connector
48 x Channel T1
	Interfaces/Ports	2 x T1 WAN
	Product Type	Network Module
	Manufacturer Part Number	NM-HDV-2T1-48=
	Manufacturer	Cisco Systems, Inc
	Product Name	Voice/Fax Network Module
	Brand Name	Cisco
	Package Contents	This complete bundle includes one (1) NM-HDV=, four (4) PVDM-12=, and one (1) VWIC-2MFT-T1-DI
	Compatibility	Supported Platforms & Minimum IOS Versions: 3745 - 12.2(8)T 3725 - 12.2(8)T 3660 series - 12.0(5)XK 3640 - 12.0(5)XK 3620 - 12.0(5)XK 2691 - 12.2(8)T1 2650 - 12.1(3)T 2600XM Series - 12.1(14) or 12.2(8)T1 2600 series - 12.0(5)XK 1720 - Not Supported 1600 series - Not Supported
	Application/Usage	Data Networking
	Limited Warranty	90

Tech Specs

	Status Indicators	Data carrier detect (CD) Loopback (LP) Alarm (AL) Voice DSP processing status
	Interfaces/Ports	2 x T1 WAN
	Interfaces/Ports Details	2 x RJ-48 Connector
48 x Channel T1
	Humidity	5% to 85% Non-condensing Relative Humidity Operating
5% to 95% Non-condensing Relative Humidity Non-operating
	Temperature	32°F (0°C) to 104°F (40°C) Operating
-13°F (-25°C) to 158°F (70°C) Storage
	Product Type	Network Module
	Manufacturer Part Number	NM-HDV-2T1-48=
	Manufacturer Website Address	www.cisco.com
	Manufacturer	Cisco Systems, Inc
	Product Name	Voice/Fax Network Module
	Brand Name	Cisco
	Data Transfer Rate	1.54 Mbps T1
	Additional Information	Modular Router Solutions: Voice & Fax Integration VPN & Firewall Solutions Flexibility: Programmable digital signal processors can support G.711, G.723, G.726, G.728, G.729 and G.729a/b for customized solutions to meet the need for high voice quality and bandwidth efficiency Packet Voice Digital Signal Processor Modules (PVDM-12=), provide the ability to increase the voice processing capabilities within this single network module Single or dual connections to PBXs, PSTNs or both using E1 or T1 interfaces via either a single or dual port E1 or T1 MultiFlex Voice/WAN interface card (VWIC) with integrated T1 CSU/DSU or E1 DSU Modular voice processing on the packet voice trunk Network Module, the Cisco 2600 and 3600 provide the power to support additional office requirements such as routing, dial concentration, firewall and VPN Dual-port, 48 channel T1 voice/fax network module: Supports 48 channels of medium complexity VoCoders: G.729a/b, G.726, G.711, and fax or 24 channels of G.726, G.729, G.723.1, G.728, G.729a/b, G.711, and fax Ccontains an integrated add/drop multiplexer Clock Support: Pull-in range +/-64 PPM, Pass-through +/-32 PPM Line Code: AMI, B8ZS AMI Ones Density: Enforced for N x 56kbps channels Framing Format: D4 (SF) and ESF Line Frequency: 1.544 Mbps +/- 75 bps/32PPM DTE/DCE Interface (VIC mode): G.704/structured DSU/CSU: Selectable DSX-1 cable length in increments from 0 to 655 feet in DSU mode Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB Selectable DS1 CSU receiver gain: 26 or 36 dB Digital Signaling Protocol: H.323 Data Compression Protocol: G.729 G.711 G.723.1 G.728 G.726 Comments: Can be field upgraded by adding one additional DSP module (PVDM-12=)
	Package Contents	This complete bundle includes one (1) NM-HDV=, four (4) PVDM-12=, and one (1) VWIC-2MFT-T1-DI
	Compatibility	Supported Platforms & Minimum IOS Versions: 3745 - 12.2(8)T 3725 - 12.2(8)T 3660 series - 12.0(5)XK 3640 - 12.0(5)XK 3620 - 12.0(5)XK 2691 - 12.2(8)T1 2650 - 12.1(3)T 2600XM Series - 12.1(14) or 12.2(8)T1 2600 series - 12.0(5)XK 1720 - Not Supported 1600 series - Not Supported
	Certifications & Standards	Digital T1/E1 Packet Voice Trunk Network Module T1 Interface Country Approval: US: - US (UL 1950, T1) - FCC Part 68 - FCC Part 15 Class B, T1 Canada: - CS-03 - CSA 950, T1 - CSA C108.8 Class A, T1 Japan: - VCCI class 2 - VCCI:V-3/97.04, T1 - JATE green book, - IEC950 Quality of Service (QoS) Standards: IETF: WFQ WRED CRTP PQ Other IOS capabilities Signaling Standards: ITU-T: H.323 v1 and v2 T1 CAS E&M Type I, II, III, IV E&M Wink Start, Wink Immediate, Wink Delay FXS Loop-Start, Ground-Start FXO Loop-Start, Ground-Start Safety Standards: UL 1950 3rd. edition CSA 950, 1995 version IEC 950 EN 60950 AS/NZS: 3260 with amendment 134 Telco Standards: AT&T Accunet (62411) ATT 54016 Physical Interface Standards: T1 ANSI ATT T1.1 ANSI T1.403
	Scalability	Scales to meet Enterprise office requirements from small offices to large corporations Interoperable with Cisco multiservice voice and data products (such as 1750, MC3810, 2600, 3600, 7200, 7500, 5300, 5800, Cisco IP Phones, IP-PBX and Catalyst Switches) The packet voice trunk network module is shared across Cisco's entire line of modular access routers giving a scalable voice solution for branch, regional, and headquarter offices with six to 360 voice channels in a single box solution Provides Enterprises and managed service providers the ability to scale to any size campus using Cisco gateways Increases voice capacity without requiring the replacement of existing Cisco 3600 and 2600 Series routers Enables the administration of large dial plans via H.323 v2/v1 gateway and gatekeeper interoperability and support
	System Requirements	Requires a Cisco IOS "PLUS" feature set
	Protocols	ATM
ISDN
VoIP
VoFR
VoATM
	Management	Network Management Support: SNMP protocol compliant Manageable via a MIB browser CiscoView interface for configuration ConfigMaker Cisco Voice Manager (CVM) supported, version 2.0 NetSys supported Digital T1/E1 Packet Voice Trunk Network Module Management: Telnet / Console: - Remote and local configuration, monitoring, and troubleshooting from Cisco IOS CLI SNMP: - Router and DSU/CSU managed by single SNMP agent - Router/DSU/CSU appear as single network entity to user standard MIB (MIB II) - Cisco integrated DSU/CSU MIB - RFC 1406 T1 MIB, including alarm detection and reporting SNMP Traps: - Generated in response to alarms
	MTBF	366394 HourMinimum
	Application/Usage	Data Networking
	Standard Warranty	90 Day Limited

BloomReach Content

Cisco Voice/Fax Network Module - 2 x T1 - NM-HDV-2T1-48=

Product Details:

Rakuten