$10 off $30 on Home, Health & Beauty, Sporting Goods, Bags, Entertainment, Apparel, Jewelry, Toys and Pet Supplies when you use V.me at checkout. Ends 5/26/2013.
| TransPac® Harness Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps. The explorers also needed the versatility to switch their gear configuration from backmount to sidemount to single tanks (flexibility that a traditional hard backplate does not offer). Designed like a mountaineer’s backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories, depending on the needs and desires of the individual diver. The TransPac is lightweight and flattens easily into a suitcase for travel. The TransPac is designed to be used with any wing in the Dive Rite line. Made in the U.S.A. Please note: The Dive Rite TransPac is not designed to be worn with a metal backplate..Soft backplate is constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. .Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waistband. .Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Sizes XS, Small and Medium have one 2-inch D-ring per shoulder strap due to space limitations. .Six 1-inch D-rings on each side of the harness provide attachment points for light canisters, pony bottles, lift bags and other equipment. .Grommet mounting holes slide over bolt kit when diving doubles and help diver set trim .Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap (Note: Sizes XS, Small and Medium have one 2-inch D-ring per shoulder strap) and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates. .Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution. .Acetyl resin engineered plastic quick release buckles on the shoulders for easy doff and don. .One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin® 1-inch quick release buckle are used for a chest strap. .Stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Pre-drilled to attach optional Tek D-rings for use with stage bottles and side mounting. .Crotch strap D-ring for attaching optional 1-inch crotch strap. Crotch strap adapter required if a 2-inch crotch strap is preferred. .Includes (2), 2-inch nylon webbing cam straps with stainless steel buckles for mounting harness to single tanks. Cam straps are standard 36-inches in length. .XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XLT:5 lbs (2.29kg), XXL:4.93lb (2.23kg), XXLT:5lbs 2 oz (2.32kg) Rec Wing Designed to be worn with double tanks or singles, the Rec Wing is our most popular due to its versatility. The Rec Wing employs a Gusset Control System (GCS) cord woven through tabs on the front face of the wing. When tightened, the cord limits lift capacity so the Rec Wing can be used with single backmount tanks. When the GCS cord is loosened, the Rec Wing provides its full lift capacity of 51 pounds/23 kg of lift and can accommodate two 95 ft3/15 L back mounted cylinders. Loose or tight, the GCS cord helps the Rec Wing maintain a small profile for divers traversing in tight passages and the cord compression helps in dumping air. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. The Rec Wing is designed for use with the TransPac, TransPlate or any webbing-style harness. Made in the U.S.A. .Black outer bag is made of 1680 denier ballistic nylon; blue and red outer bags are made of 1,000 denier ballistic nylon, both fabrics resist tears and abrasion. .Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms. .Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools. .Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose. .Two sets of three marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or to double tanks and set diver trim. .3.12 lbs (1.41kg) .Made in U.S.A. Dive Rite 2in Crotch Strap with Loop Sewn-in loop requires the strap to be threaded on to the waist belt webbing and then the webbing threaded through the buckle each time the harness is donned. Preferred by divers who use scooters (DPVs) for extended periods of time due to the added distribution of weight the 2-inch width provides. .Includes a neoprene sleeve to protect exposure suit from abrasion. .Continuous 2-inch nylon webbing crotch strap has 2,800 lbs tensile strength and is 42-inches long with a stainless steel welded scooter ring. .When using the 2-inch Crotch Strap with the TransPac, our Crotch Strap Adaptor is required. A 1-inch version (without abrasion pad) is also available. Dive Rite Transpac The 32lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. The insert pocket has two compartments to separate heavy weights and keep them from slipping inside. Designed to be worn with the TransPac harness, the 32lb QLR Weight Pocket is worn vertically with each pocket holding up to 16 lbs. of weight securely in position throughout the dive. Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place..Holds up to 16 lbs (7.25 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo. .1680 denier ballistic nylon fabric is tear and abrasion resistant. .Two-inch (50 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place. .Acetyl quick buckle is used to easily open and close the pocket. .Nickel plated brass grommets resist rust and corrosion. .8.5-in high x 6-in wide x 1.5-in deep (21.6 cm x 15.3 cm x 3.8 cm) .1.13 lb (0.51kg) |
