Be the first to review this item and earn 25 Rakuten Super Points™
Dyna-Lite's smallest power pack. The ultimate in portability and affordability. 500 watt/seconds of total flash power with five f-stop range and a Variator to provide 1/3 stop fine tuning. Weighs only 4.2 pounds! Has a footprint of just 5 5/8" x 5 7/8" and stands only 5 1/4" high, including the handle.
AC Power Cord Socket. Accepts standard computer style AC cords.
Audible Ready Indicator Switch. 100% recycle indicator with its own on/off switch.
Built-in WEIN slave-eye with on/off switch. Can be triggered by any flash and will also respond to most infrared triggers.
Circuit Breaker. Easily resettable protection
Flash Head Outlets. Three outlets completely arc protected. You can plug and unplug flash head cables without shutting down the power pack.
Modeling Light Switch. Three-position modeling light control; full on, off, or direct tracking. Flash head fans always run at full speed regardless of switch position.
Power Control Switches. Two full/half/quarter power switches provide seven basic power settings from 62 to 500 watt/seconds.
Ratio/Combined Output Switch. An indicator light tells you whether your power is routed symmetrically or asymmetrically between the "A" and "B" flash head outlet banks.
Ready Light/Test Switch.Serves as an open flash test switch and signals 100% flash readiness.
Sync Input Socket. Three-pronged socket to accept our 0315x synch cord, which prevents accidents.
Threaded Insert. For optional 5/8" mounting stud.
Variator Control. Click stops allow you to fine-tune your basic power settings in 1/3 stop increments. Used in combinations, the power control switches and Variator provide a total of 15 different power settings with a single flash head.