Be the first to review this item and earn 25 Rakuten Super Points™
The Emulex LP1050DC-F2 host bus adapters offers highly integrated 2Gbps Fibre Channel to PCI/PCI-X connectivity solutions for mid-range storage area networks. The LP1050DC-F2 HBAs deliver exceptional performance through the use of "Thor", Emulex's sixth generation Fibre Channel controller. The Thor high performance controller is a dual channel device that combines ARM9 microprocessors, 1Gig/2Gig SERDES, and an advanced Fibre Channel protocol engine into a single module. The LP1050DC-F2 is dual-channel HBA, in a low-profile PCI card form factor that adapts to either standard height or low profile server slots.
Emulex LP1050DC-F2 HBAs feature specialized hardware, which yields superior performance in SANs and provides best in class server CPU off load. Emulex's HBA architecture delivers low latency and high throughput in switched fabric and arbitrated loop topologies, and in clustered environments.
984 ft 50/125 µm Multi-mode Fiber @ 2 Gbps / 492 ft 62.5/125 µm Multi-mode Fiber @ 2 Gbps
Quad Data Rate (QDR) SRAM Unified Data Buffer & Code Space memory 16 Buffer-to-Buffer Credits supported (per channel) 1K+ Contexts Cached On board (per channel) 3.3V signaling, 5V tolerant Standard bracket (low profile available) Airflow Required: 100 lf/m Automatic topology and speed adaption On board hardware context cache for superior fabric support and high transaction performance Support for use of multiple concurrent protocols (SCSI & IP) Simultaneous on card support for remote boot support in x86 and Itanium (BootBIOS and EFI) environments End-to-end parity protection for high data integrity 1Gig/2Gig SERDES
Operating System: Windows Server 2003 Windows 2000 Windows NT NetWare Linux Hardware: x86 Intel Itanium Processor family
Certifications & Standards
IETF IP over FC PCI-X 1.0a PCI 2.3 Agency Approvals: Class 1 Laser Product per DHHS 21CFR (J) & EN60825 UL recognized to UL 1950 CUR recognized to CSA22.2, No. 950 TUV certified to EN60950 FCC rules, Part 15, Class A ICES-003: Class A EMC Directive 89/336/EEC (CE Mark) EN55022, Class A EN55024 Australian EMC Framework (C-Tick Mark) AS/NZS: 3548, Class A VCCI: Class A MIC (Korea): Class A BSMI (Taiwan): Class A
2.54" Height x 6.60" Width
Low-profile MD2 Hot-swappable
3.3 V DC / 5 V DC
8.10 W Typical @ 66 MHz / 11.60 W Maximum @ 66 MHz / 9.20 W Typical @ 100 MHz / 13.10 W Maximum @ 100 MHz / 9.20 W Typical @ 133 MHz / 13.10 W Maximum @ 133 MHz