Emulex LightPulse LP982 PCI-X host bus adapter - LP982-F2

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

The LP982 PCI-X host bus adapter offers a highly integrated 2Gb/s Fibre Channel HBA for use in servers based on either PCI or the latest PCI-X expansion bus. The LP982 delivers exceptional performance through the use of an Emulex Pegasus ASIC, a 266MIPs onboard processor, an embedded 1Gig/2Gig SERDES, and a high performance unified QDR SRAM. The LP982 features automatic topology detection and automatic speed negotiation capability. These capabilities allow complete compatibility with existing 1Gb/s Fibre Channel SANs, while allowing seamless upgrades to higher speed 2Gb/s SANs.

The features of this PCI-X based HBA provide the flexibility and broad interoperability needed for complex, highly scalable SANs. The LP982 provides a combination of features, fabric support using F_Port and FL_Port connections, full-duplex data transfers, high data integrity features, support for all Fibre Channel topologies, and support for service classes 2 and 3.

Specifications

Manufacturer Emulex
Mfg Part# LP982-F2
SKU 10386520
UPC 706947008917
UPC 14 00706947008917
Features
Product Type Fibre Channel Host Bus Adapter
Manufacturer Part Number LP982F2
Manufacturer Emulex Corporation
Product Name LightPulse LP982 PCI-X host bus adapter
Product Line LightPulse
Brand Name Emulex
Compatibility Driver Support:Windows Server 2003Windows 2000Windows NTLinuxNetWare66/100/133MHz PCI-X 1.0a and PCI 2.2 compatibility
Form Factor Low-profile MD2
Height 2.5"
Width 6.6"
Host Interface PCI / PCI-X
Data Transfer Rate 1.06 Gbit/s / 2.13 Gbit/s
Topology Point-to-Point / Arbitrated Loop / Switched Fabric
Fibre Channel Class Supported Class 2 / Class 3
Fiber Optic Cable Standard 62.5/125 µm / 50/125 µm
Number of LC Ports 1
Media Type Supported Optical Fiber
Fiber Mode Supported Multi-mode
Total Number of Fibre Channel Ports 1
Limited Warranty 3 Year
Tech Specs
Humidity 5% to 95% Non-condensing Relative Humidity
Temperature 32°F (0°C) to 113°F (45°C) Operating / -40°F (-40°C) to 158°F (70°C) Storage
Product Type Fibre Channel Host Bus Adapter
Manufacturer Part Number LP982F2
Manufacturer Website Address www.emulex.com
Manufacturer Emulex Corporation
Product Name LightPulse LP982 PCI-X host bus adapter
Product Line LightPulse
Brand Name Emulex
Data Throughput 3.13 Gbps Throughput Fibre Channel Full-duplex
Data Transfer Rate 1.06 Gbps Fibre Channel / 2.13 Gbps Fibre Channel
Connectivity Media 62.5/125 µm Multi-mode Fiber Fibre Channel / 50/125 µm Multi-mode Fiber Fibre Channel
Distance Support 1640 ft 50/125 µm Fiber @ 1 Gbps / 984 ft 62.5/125 µm Fiber @ 1 Gbps / 984 ft 50/125 µm Fiber @ 2 Gbps / 492 ft 62.5/125 µm Fiber @ 2 Gbps
Standard Memory 1 MB SRAM / 2 MB Flash
Additional Information 3.3V signaling, 5V tolerant End-to-end parity protection for high data integrity All drivers are also fully compatible with the Emulex LP10000, LP9002L, LP850, LP8000, LP7000E, LP952L, LP9402DC LP9002C, LP1050 and LP9802 host bus adapters A 266 MIPs onboard processor Embedded 1Gig/2Gig SERDES Emulex Pegasus ASIC technology up to 133MHz PCI-X DMA x86 PCI hardware platforms
Compatibility Driver Support: Windows Server 2003 Windows 2000 Windows NT Linux NetWare 66/100/133MHz PCI-X 1.0a and PCI 2.2 compatibility
Certifications & Standards PCI-X 1.0a PCI local bus revision 2.2 AGENCY APPROVALS: Class 1 Laser Product per DHHS 21CFR (J) & EN60825 UL recognized to UL 1950 CUR recognized to CSA22.2, No. 950 TUV certified to EN60950 FCC rules, Part 15, Class A ICES-003, Class A EMC Directive 89/336/EEC (CE Mark) - EN55022, Class A - EN55024 Australian EMC Framework (C-Tick Mark) - AS/NZS 3548, Class A VCCI, Class A
Dimensions 2.54" Height x 6.60" Width
Form Factor Low-profile MD2 Hot-swappable
Input Voltage 3.3 V DC 5%
Power Consumption 7.70 W / 8.50 W
Protocols FC-PH / FC-AL / FC-PLDA / FC-FLA / FC-Tape / FC-PI / FC-FS / FC-MI
Management LUN Masking LUN Mapping Persistent Binding I/O Coalescing Full Fabric Boot Multi or simultaneous protocol (SCSI & IP) operation Most drivers include a full-featured implementation of the FC-MI HBA Management Interface
Host Interface PCI 66 MHz 64-bit / PCI 66 MHz 32-bit / PCI 33 MHz 64-bit / PCI 33 MHz 32-bit / PCI-X 66 MHz / PCI-X 100 MHz / PCI-X 133 MHz
Ports/Channels 1 x LC Fibre Channel
Topology Point-to-Point / Arbitrated Loop / Switched Fabric
Fibre Channel Class Support Class 2 / Class 3
Standard Warranty 3 Year
loading
Sold Out
Sorry, you missed the deal!
This product is currently not available.
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details
ADVERTISEMENT
ADVERTISEMENT