Per-port Link: Green - indicates that the port hardware detects a cable plugged into the port and a good link is established. Red (intermittent) - indicates that the port received an error during operation. Red (solid) - indicates that the port hardware detects a cable plugged into the port, however, a bad link is established. Off - indicates that no link from exists with the port. Per-port Rx: Green - indicates when the port's transceiver receives packets. Orange - indicates when the port's transceiver receives flow-control packets. Per-port Tx: Green - indicates when the port's transceiver transmits packets. Orange - indicates when the port's transceiver transmits flow-control packets. Per-port AN: Green - indicates that the expansion module is autonegotiating the operating mode of the link between full-duplex and half-duplex. Orange (intermittent) - indicates that autonegotiation is in process. Orange (solid) - indicates a problem with autonegotiation configuration. Red - indicates an autonegotiation failure. This fault may occur if the link partner does not support full duplex. Off - indicates that autonegotiation has been disabled or the link is down.
Auto-negotiation Flow control Full duplex capability
Certifications & Standards
IEEE 802.3x IEEE 802.3z
Additional Warranty Information
Firmware patch releases when available, at the discretion of the Enterasys TAC.
Part - Parts Exchange within 30 days of shipment for one year warranty and within 90 days of shipment for a three year warranty, followed by Return to Factory Repair on a commercially-reasonable efforts basis for the duration of the warranty period.
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
5% Back* Sitewide with Promo Code Rewardme
*See page for details