For Two dogs Remote Pet Trainer , Rechargeable LCD display Dog Electric Training Collar With Controller , 100 Level Shock and Vibration

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Are you thinking it is time for an anti bark collar?YES.Is your dog barking incessantly?YES.SO it is time for you to get an anti bark collar! Now the question is which anti bark collar is the right bark collar to stop your dogs incessant barking? Our latest rechargeable intelligent anti bark collar will be the right choice for you! IT is Effective, Economic, Safe and Humane!Continually giving your dog plenty of warning before it becomes painful, its unique pattern of low-pitched sound, vibration and 100 levels of progressively increasing static stimulus quickly teaches your dog that it is its own bark that is causing the discomfort. The specially-designed low-pitched warning sounds are also suitable for those who have a hard time hearing high-pitched sounds. (Note: most collars on current market issue high-pitched sounds, which could sometimes cause disturbance.)


Manufacturer ChargerBuy
Mfg Part# 135-01301-16-001
SKU 222327289
UPC 952848623023
UPC 14 06952848623023
1 x charger&cord
1 x Operating Instructions
1 x remote control unit
1. 100 levels of vibration.
1. The life span of the batteries vary to how often you use the product. Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator light on the LCD screen of the Transmitter.
1. Turn on the Transmitter and choose 1or 2 channels to encode.
1.Connect the charger connector to the charging jack.
1.The Collar Receiver will TURN OFF if it is unused for 4 minutes.
1.To turn on/off the Transmitter,Press the mode button on the Transmitter for 5 seconds.
2 x collar
2 x test light&replacement probes
2. 100 levels of static .
2. Any movement will activate the Collar Receiver into STANDBY MODE.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
2. Plug the charger into a standard outlet.
2. The valid distance of remote control means the straight-line distance between the Transmitter and the Collar Receiver without obstacles in between. If there are interference source around, the actual remote control distance may vary.
2.By pressing the Mode button to change to different modes ----the LCD images will change.
2.Plug the charger into a standard outlet.
3. The levels can be altered by use of up & down button.
3. The Transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes.
3. This product is for pet training only , by training,the pet can understand the intention of its owner.Desirable results can only be achieved after a period of training.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
3.Press the up and down buttons on right hand side to set level.
3.The red LED light inside the Collar Receiver will turn on
3.The red light on the Transmitter will be lighted.
4. Charge the Collar Receiver at least 6 hours for the first charge.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
4. The system can be used for 1 or 2 receivers.(the additional receiver must be the same type as your previous one and purchased from us)
4. Training sessions should be kept positive and short, about 10-15 minutes each time.
4.Charge the Transmitter at least 6 hours for the first charger.
4.Choose the different channels for different receivers.
5. After fully charged, the red LED light will be turned off automatically.
5. Presently,this product is the most effective and safest tool for pet training. Following the correct operation instructions,you can effectively train your pet and make it a docile and adorable creature.
5. The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
5.After fully charged, the red led will be turned off automatically.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
6. When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water.
6.1n STANDBY MODE, press any button (except LED light button) to wake it up.
Charge the Collar Receiver
Charge the Remote Transmitter
Connect the Transmitter with the Collar Receiver
How to Use the Transmitter
Low battery Indicator: the symbol :Q will show up on the right down side of LCD screen.
Low battery Indicator:the Collar Receiver will keep beeping for 2 minuets unless It gets charged.
Prepare the Remote Transmitter
What is in the box:
Product Attributes
Pet Dog
Pet Size Code Medium
$60.99 + free shipping
Rakuten Super Points Earn 61 ($0.61) Rakuten Super Points™
What are Rakuten Super Points™?
Get rewarded when you shop! Earn 1 point per dollar spent. That's like getting cash back on every purchase. Easy to see matured points in checkout. Use points just like cash.
Learn More
Get this item for
(price with shipping)
(redeem points)
Condition: Brand New
In Stock. Usually Ships in 1 to 2 business days
Please select an option to buy
Add to Cart

Sold By:  ChargerBuy
What is a Marketplace and Shop Owner?
  • Our marketplace is a platform where approved third-party retailers (Shop Owners) can sell their products
  • Items are sold and shipped by Shop Owners
  • Your credit card and personal information remain secure; meets all PCI Security Standards.
  • Purchases can only be returned to the Shop Owner
  • All purchases receive Rakuten Super Points™
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details