2.1 speaker kit : 2 satellites + wooden subwoofer
Exclusive design voted for by consumers in a European poll
Wired remote control:
Volume control knob on remote control
Line input and headphone connector on remote control
Integrated power supply
Total output power: 10 Watts RMS (2 x 2.5W + 5W). 20 Watts Peak Power
2 rectangular magnetically shielded satellite speakers (for flat surfaces, not wall mountable)
Wooden subwoofer with bass control
Satellite dimensions : 25cm H x 6.5cm W x 6cm D
1.8m cable to connect the audio source
2 magnetically shielded satellites
Cable to connect the audio source
Wired remote control
Power supply cable (220-240V)
PC with sound card
Video game consoles
System for transmitting sound over three channels, with 2 channels reproducing medium and high range frequencies and 1 channel reproducing bass frequencies.
Satellite is the name given to a speaker which does not reproduce bass frequencies: this speaker is therefore the satellite to a subwoofer. In a X.1 kit (2.1, 4.1, 5.1 , 6.1 or 7.1), the digit before the point 1, i.e. the 2, 4, 5, 6 or 7, represents the number of satellites in the speaker kit.
Unit reproducing an acoustic wave from an electrical signal which vibrates one or more membranes, the movements creating a sound wave.
Abbreviation of stereophonic. A stereophonic signal is a signal transmitted over 2 channels: one channel on the left and one channel on the right, whereby the sound transmitted is different on each channel.
The subwoofer is a speaker which reproduces bass frequencies, and is often larger than other types of speakers as bass frequencies require larger membranes than is the case with high or medium frequencies. A single subwoofer is most often included in a speaker kit: as bass frequencies are transmitted all around the membrane (omnidirectionally) and not just in front of the membrane, a single subwoofer is sufficient to provide rich bass sound all across an area, as long as it is powerful enough. In a X.1 kit (2.1, 4.1, 5.1, 6.1 or 7.1), the digit after the period, i.e. the 1, signifies that 1 subwoofer is included.
Watts Peak Power:
Watts Peak Power represents the peak electrical power delivered by an amplifier to speakers.
Power in Watts RMS represents the continuous electrical power delivered by an amplifier to speakers.