Iolite Vaporizer Green - iolitegreen
|The Iolite Vaporizer heats up with the help of Butane Gas, so naturally you will have to fill it up somehow. Picture 6 above will keep you on track while you are reading this next section. In Picture 6 above you will see the part labeled Filling Valve that is pointed to a brass valve where you will insert the Butane Gas. To fill the Iolite correctly hold the Iolite Vaporizer straight up and flip the Butane Can upside down. Make contact between the valve/nipple of the Iolite and the upside down Butane can valve and twist it a little to make sure there is good contact. Then push down the Butane Can to start filling the Iolite Vaporizer with butane gas. It should fill for about 5-10 seconds and once full butane gas will spill out the sides and evaporate almost immediately.With a full Iolite Vaporizer in hand now, Push the On/Off Switch from 0 to 1 and you will hear a slight hissing sound from the unit. This is a normal sound so do not be alarmed, you may also smell some Butane Gas that too is normal and safe. Now you must internally ignite the Iolite, simply push in the Piezo Starter Button one time, it will click.If you look at the Heater Mesh Screen above in Picture 6 (this is the mesh looking part on one side of the Iolite) you should see a small blue light turn into a small orange light for about 20 seconds, this orange light will be accompanied by the sound of hissing you already heard once. If you do not see the Orange Light that is okay it will not always be on, the Iolite heats in cycles, and every "cycle" will include some hissing and the orange light. If you did not press in the Piezo starter button on the Iolite Vaporizer then you will just hear hissing and never see any lights. Remember - Fill, Turn On, Ignite, Inhale.|
The WISPR by IOLITE comes perfectly boxed, giving this product ...