Kentrox DataSMART 698 T1 CSU/DSU - 72698

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

With FrameVision from Kentrox, service providers and enterprise customers can monitor the end-to-end performance of their Frame Relay network. DataSMART Frame Monitoring stand-alone DSU/CSUs support T1/FT1 Frame Relay services. When teamed with ServicePoint Manager software, network managers can verify Service Level Agreements (SLAs); isolate performance problems to the LAN, local loop, or Frame Relay network; determine appropriate bandwidth needs; and monitor network trends to aid in future capacity planning.


Manufacturer Kentrox
Mfg Part# 72698
SKU 10020593
UPC 872114004171
UPC 14 00872114004171
Number of Network (RJ-45) Ports 1
Network (RJ-45) Yes
Serial Port Yes
Serial V.35 Interface Yes
Product Type CSU/DSU
Manufacturer Part Number 72698
Manufacturer Kentrox, LLC
Product Model 698
Product Name DataSMART 698 T1 CSU/DSU
Product Line DataSMART
Brand Name Kentrox
Form Factor Desktop / Tray Mountable
Height 1.7"
Width 7.8"
Depth 11.5"
Encoding Method AMI/B8ZS
Limited Warranty 5 Year
Tech Specs
Status Indicators Power/fail T1 Data port transmit Data port receive Data port CTS Data port RTS
Electrical Interface Serial V.35
Ports 1 x 34-pin Serial V.35 / 2 x RJ-48C Network Mechanical / 1 x 9-pin DB-9 Management / 1 x RJ-45 Network
Humidity 5 to 90% Non-condensing Relative Humidity Operating / 5 to 95% Relative Humidity Storage
Temperature 32°F (0°C) to 122°F (50°C) Operating / -4°F (-20°C) to 150.8°F (66°C) Storage
Product Type T1 CSU/DSU
Manufacturer Part Number 72698
Manufacturer Website Address
Manufacturer Kentrox, LLC
Product Name DataSMART 698 T1 CSU/DSU
Product Line DataSMART
Brand Name Kentrox
Data Transfer Rate 1.54 Mbps
Additional Information Add/drop port available for voice and data traffic integration Isolate poor performance to the requirements Match bandwidth to business rquirements Reports available with ServicePoint Manager Standards-based, in-band management with SNMP Validate Frame Relay service level agreements Network Interface: - Framing: SF, ESF, Ericsson - Lightning protection: Withstands lightning surges defined per FCC Part 68, and recovers - Output Signal: DS-1 with LBO 0, -7.5, -15 dB (selectable) - Protocol: Frame Relay or transparent Terminal Interface: - Framing: SF, ESF, Ericsson - Input Signal: DSX-1 to -10 dB - Line Code: AMI, B8ZS - Mechanical: RJ48C socket - Output Signal: DSX-1 with equalization Data Port Interface: - Mechanical: MRAC34 socket Management: - Control ports: DCE, EIA-574, 38.4 kbps maximum, English menus, Async ASCII or SLIP - Ethernet port: 10Base-T Rj45 socket, Transmit and Receive LEDs - In-band: From network or router, Shared or dedicated VC, Frame Relay - LCD: Front panel display or unit status, Front panel configuration of unit - SNMP Agent: MIB II (RFC 1213), DS1 MIB (RFC 1406), Frame Relay MIB (RFC 1315), Enterprise MIB*, TELNET Server, Responds to Ping, Security filters (for IP source addresses), Up to 10 SNMP Trap hosts Alarms: - ASCII: Transmitted out async control port - Traps: SNMP Traps via SLIP, Ethernet or in-band Frame Relay Circuit Management: - Methodology: Non-intrusive, in-band - NI/Data port availability measurements: Seconds available, in test or in alarm state for newtork interface and data portNI/Data port statisticsFrame count, octet count, invalid header address, excessively long frames, HDLC errors, IP management frame and octet counts - Reports: Frame VC utilization, Frame VC round-trip delay, Frame VC delivered data, Frame VC availability, Frame VC statistical, Frame NI/Data port statisticalVC availability measurementsFrame Relay Link Management (FRLM), FRLM activity, FRLM configuration, Router and switch status, Spoofing status- events and seconds, VC availability and status - VC delay measurementsMaximum observed delay, average delay, attempts made, delay threshold exceeded, automatic delay measurements for up to 64 active VCs - VC frames delivered report: Frames dropped Tx/Rx, octets dropped Tx/Rx - VC status: Frames Tx/Rx, octets Tx/Rx, BECN set, FECN set, DE set - Virtual Circuit (VC) utilization: Frame and octet counts for data sent above CIR and above excess burst rates Local Loop Performance Monitoring: - Data storage: - last 24 hours of data in 15 minute increments - last 7 days of data in 24-hour increments - Methodology: T1.403 in-band performance monitoring - Monitors: Network interface - Registers: Separate for carrier and user - Reports: Based on G.821 for performance, Far end, Alarm history, Network interface statistical
Compatibility ANSI: T1.403-1995 AT&T: TR 62411-1990, TR 54019A, PUB 43802 Bellcore: TR.194
Certifications & Standards IC: CS-03 CSA: - 22.2 - No. 950 FCC compliance: - Part 68 - Part 15, Class A NRTL Listed: - UL 1950 - 3rd Edition
Dimensions 1.65" Height x 7.75" Width x 11.50" Depth
Form Factor Desktop / Tray-mount
Input Voltage 115 V AC
Frequency 60 Hz
Power Consumption 7 W
Management SNMP
Data Encoding AMI/B8ZS
Diagnostic Features LEDs: Power/fail, T1, Data port transmit, Data port receive, Data port CTS, Data port RTS Loop tests: Local loopback, data terminal loopback Local Loop Diagnostics: - BERT Tester: Independent BERT on all test codes - Data test codes: 511, 2047 - Line test codes: QRS, 3-in-24, 1-in-8, All 1s, All 0s - Loop tests: Line loopback, Payload loopback, Data port loopback
Standard Warranty 5 Year
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details