Kentrox M-PATH 538 T1 Plug-in CSU with Ethernet Interface - 77538

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Intelligent T1 CSU for Base Stations:
Wireless carriers have unique access equipment needs, and Kentrox understands them. The M-PATH T1 CSU was designed specifically for rapid network deployment in the rugged, compact environment of outdoor cabinets. It operates at an extended temperature range and occupies minimal space.

Kentrox designed the M-PATH CSU especially for the space limitations of remote cabinets. Up to two M-PATH plug-in CSUs can be installed in a single rack-unit Universal Shelf. Or for higher-density sites, the 12-slot Universal Shelf occupies only four rack units of space.


Manufacturer Kentrox
Mfg Part# 77538
SKU 10376871
UPC 872114000999
UPC 14 00872114000999
Serial Port Yes
Product Type CSU
Manufacturer Part Number 77538
Manufacturer Kentrox, LLC
Product Model 538
Product Name M-PATH 538 T1 Plug-in CSU with Ethernet Interface
Product Line M-PATH
Brand Name Kentrox
Package Contents M-PATH 538 T1 Plug-in CSU with Ethernet InterfaceDataSMART Installer
Encoding Method AMI/B8ZS
Limited Warranty 5 Year
Tech Specs
Status Indicators LEDs: Power/fail, test, transmit, receive, CTS, RTS, auto configuration enabled Ethernet port transmit and receive
Electrical Interface EIA-232D Serial / CCITT V.35 DTE
Ports 1 x 9-pin DB-9S Control / 1 x 25-pin DB-25 Mechanical / 1 x 15-pin DA-15 Network / 1 x 25-pin DB-25 / 1 x RJ-48S Mechanical
Humidity 5 to 95% Relative Humidity Operating / 5 to 90% Non-condensing Relative Humidity Storage
Temperature -4°F (-20°C) to 149°F (65°C) Storage / -4°F (-20°C) to 140°F (60°C) Operating
Product Type T1 CSU
Manufacturer Part Number 77538
Manufacturer Website Address
Manufacturer Kentrox, LLC
Product Name M-PATH 538 T1 Plug-in CSU with Ethernet Interface
Product Line M-PATH
Brand Name Kentrox
Data Transfer Rate 1.54 Mbps Network / 1.54 Mbps Terminal
Additional Information 12-slot Shelf 7" H x 17" W x 12" D 12 lbs. empty 2-slot Shelf 1.75" H x 17" W x 12" D 8 lbs empty Framing: SF, ESF, Ericsson Output signal: DSX-1 with equalization In-band management eliminates most on-site CSU maintenance costs Performance Monitoring: Data Storage Last 24 hours of data in 15-minute increments; last 7 days of data in 24-hour increments Monitors Network and terminal interfaces Registers Separate registers for carrier and user available Reports Alarm history - 20 messages,Network interface statistics, Terminal interface statistics Alarms: SNMP Traps Default SNMP traps; equipment failure; authentication failure traps NI1 and NI2 Traps Network OS/OOF/AIS/YEL link down trap; network EER enterprise trap; network link up trap Terminal Interface Terminal LOS/OOF/AIS/YEL link down trap; terminal Traps link up trap Data Port Traps Data port loss per DTR/RTS link down trap; data port link up trap SNMP Traps via Ethernet
Package Contents M-PATH 538 T1 Plug-in CSU with Ethernet Interface DataSMART Installer
Compatibility AT&T: TR 54016 - 1989; TR 62411 - 1990 TR54019A; PUB 43802 ANSI: T1.403 - 1995 Bellcore: TR.194
Certifications & Standards FCC: Part 68, Part 15, Class A NRTL: Listed to UL1950 I3 CSA: 22.2 no. 950 M89 IC: CS 03
Input Voltage 24 V DC or 48 V DC
Power Consumption 8 W Maximum
Management Control Port DCE and DTE; EIA-574 (DE9 socket); Daisy chain; 38.4 kbps maximum; English menus; async ASCII or SLIP, PPP; Telnet capable SNMP Agent In-band management communications: MIB-II (RFC 1213); DS1 MIB (RFC 1406); enterprise MIB; Telnet server; Responds to Ping; Security filters (for IP source addresses); up to 10 SNMP trap hosts Data Retention Configuration database retained through power loss/ cycle Real-Time Clock powered for at least two hours after power loss Software download Through the control port (direct or modem) Through TFTP via IP connection or via the data link
Data Encoding AMI/B8ZS
Diagnostic Features Network Interface Data, red alarm, code violation, yellow Terminal Interface Data, alarm, code violation Loop Tests Line, payload, data port, data terminal, terminal interface Line Test Codes QRS, 3-in 24, All 1s, All 0s Data Test Codes 511, 2047 Set/Reset Codes Network FIF:10000b (LLB), 1111100b (PLB), 100b, 127H (Reset) Data port: 127 (Set), 127 not (Reset) BERT Tester Independent BERT on all test codes transmitted by unit Ethernet Connection 10Base-T PCMCIA adapter Configuration Automatically con gures M-PATH 77537 units as added to shelf
Standard Warranty 5 Year
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details