Kentrox M-PATH T1 CSU - 77537

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

The M-PATH T1 CSU (Channel Service Unit) saves money by minimizing on-site visits, and proactively prevents network downtime.


Manufacturer Kentrox
Mfg Part# 77537
SKU 10020561
UPC 872114000982
UPC 14 00872114000982
Serial Port Yes
Serial V.35 Interface Yes
Product Type CSU
Manufacturer Part Number 77537
Manufacturer Kentrox, LLC
Product Name M-PATH T1 CSU
Brand Name Kentrox
Height 1.8"
Width 17"
Depth 12"
Encoding Method AMI/B8ZS
Limited Warranty 5 Year
Tech Specs
Status Indicators Power/fail Test, transmit, receive, CTS, RTS Network interface: data, red alarm, code violation, yellow alarm Terminal interface: data, alarm, code violation
Electrical Interface Serial V.35
Ports 2 x 9-pin DB-9 Management / 6 x RJ-48 Mechanical / 2 x 25-pin DB-25 Network Mechanical
Humidity 5 to 95% Non-condensing Relative Humidity Operating
Temperature -4°F (-20°C) to 140°F (60°C) Operating
Product Type T1 CSU
Manufacturer Part Number 77537
Manufacturer Website Address
Manufacturer Kentrox, LLC
Product Name M-PATH T1 CSU
Brand Name Kentrox
Modules 1 x
Data Transfer Rate 1.54 Mbps Network
Additional Information Network Interface: - Framing: SF, ESF, Ericsson - System Timing: Internal, loop, terminal Terminal Interface: - Framing: SF, ESF, Ericsson - Output signal: DSX-1 with equalization Data Interface (shared with terminal interface): - Mechanical: DB25 socket (requires cable to share port with Terminal interface) Performance Monitoring: - Data storage: - Last 24 hours of data in 15 minute increments - Last 7 days of data in 24 hour increments - Monitors: Network and terminal interface - Registers: Separate registers for carrier and user available - Reports: - Alarm history - 20 messages - Network interface statistical - Terminal interface statistical Alarm Traps: - SNMP traps: - Default SNMP Traps - Equipment failure - Network LOS/OOF/AIS/YEL linkdown trap - Network EER enterprise trap - Network linkup trap - Terminal LOS/OOF/AIS/YEL linkdown trap - Terminal linkup trap - Data port loss per DTR/RTS linkdown trap - Data port linkup trap - External
Compatibility Bellcore: TR.194 ANSI: T1.403 - 1995 AT&T: - TR 54016 - 1989 - TR62411 - 1990 - TR54019A - PUB 43802
Certifications & Standards IC: CS-03 NTRL listed: UL 1950, 3rd Edition CSA: 22.2 no. 950 M89 FCC Compliance: - Part 68 - Part 15, Class A
Dimensions 1.75" Height x 17" Width x 12" Depth
Form Factor Plug-in Module
Input Voltage 105 V AC to 130 V AC / 20 V DC to 56 V DC
Power Consumption 10 W / 8 W
Management Data retention: - Configuration database retained through power loss/cycle - Real Time Clock powered for at least two hours after power loss Shelf control ports: - DCE and DTE - EIA-574 (DE9 socket) - Daisy chain - 38.4 kbps maximum - English menus - Async ASCII or SLIP, PPP - TELNET capable SNMP Agent: - In-band management communications - MIB-II (RFC 1213) - DS1 MIB (RFC 1406) - Enterprise MIB - TELNET server - Responds to Ping - Security filters (for IP source addresses) - Up to 10 SNMP Trap hosts Software Download: - Through the control port (direct or modem) - Through TFTP via IP connection or via the data link
Data Encoding AMI/B8ZS
Diagnostic Features BERT tester: Independent BERT on all test codes transmitted by unit Data test codes: 511, 2047 Line test codes: QRS, 3-in-24, All 1s, All 0s Loop tests: Line, payload, dataport, data terminal, terminal interface Set/reset codes: - Network FIF: 10000b (LLB), 1111100b (PLB), 100b, 127H (Reset) - Data port: 127 (set), 127 not (reset)
Parts Warranty/Labor 5 Year
Standard Warranty 5 Year Limited
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details