Kingston HyperX Blu KHX1600C9D3B1K2/8GX 8GB (2 x 4GB) 1600MHz DDR3 Non-ECC CL9 DIMM XMP

Kingston proudly introduces HyperX blu, a new line of reliable memory ideal for the entry level gamer or PC enthusiast.

HyperX blu features a new streamlined clipless design. Its heat spreaders provide thermal performance at an improved price point. HyperX blu is available in DDR2 and DDR3.

Features

	JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
	VDDQ = 1.5V (1.425V ~ 1.575V)
	667MHz fCK for 1333Mb/sec/pin
	8 independent internal bank
	Programmable CAS Latency: 9, 8, 7, 6
	Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
	Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
	8-bit pre-fetch
	Burst Length: 8 (Interleave without any limit, sequential with
	starting address “000” only), 4 with tCCD = 4 which does not
	allow seamless read or write [either on the fly using A12 or
	MRS]
	Bi-directional Differential Data Strobe
	Internal(self) calibration : Internal self calibration through ZQ
	pin (RZQ: 240 ohm ± 1%)
	On Die Termination using ODT pin
	Average Refresh Period 7.8us at lower than TCASE 85°C,
	3.9us at 85°C < TCASE < 95°C
	Asynchronous Reset
	PCB: Height 1.180” (30.00mm), double sided component

Tech Specs

	CL(IDD): 9 cycles
	Row Cycle Time (tRCmin): 49.5ns (min.)
	Refresh to Active/Refresh Command Time (tRFCmin): 160ns (min.)
	Row Active Time (tRASmin): 36ns (min.)
	Power (Operating): 1.800 W*
	UL Rating: 94 V - 0
	Operating Temperature: 0 C to 85 C
	Storage Temperature: -55 C to +100 C

BloomReach Content

Kingston HyperX Blu KHX1600C9D3B1K2/8GX 8GB (2 x 4GB) 1600MHz DDR3 Non-ECC CL9 DIMM XMP

Product Details:

Rakuten