LG-Ericsson TigerSwitch SMC8126PL2-F Ethernet Switch

The TigerSwitch 10/100/1000 SMC8126PL2-F is an intelligent Layer 2 full-power PoE switch with 24 10/100/1000BASE-T ports, four of which are combo ports that are shared with four SFP transceiver slots and two additional SFP slots. The IEEE 802.3af Power over Ethernet (PoE) operates on all 10/100/1000 ports enabling IP phones or cameras to be installed without the need for extra power cables. It supports full-power PoE with 15.4W on all RJ-45 ports and comes installed with clustering software which will enable grouping together of up to 32 of other SMC6100 and SMC8100 switches. The SMC8126PL2-F is capable of reaching up to 52Gbps with a non-blocking single chip switching architecture. It provides cost-effective, Ethernet switching for bandwidth-intensive networks that require advanced switching features to ensure smooth transmission of mission critical data.

Features

	Performance and Scalability
	With 52Gbps switching capacity, the SMC8126PL2-F delivers wire-speed switching performance on all gigabit ports, allowing users to take full advantage of existing high-performance, gigabit integrated servers, PCs and laptops by significantly improving the responsiveness of applications and file transfer times.
	High Availability
	IEEE 802.1w Rapid Spanning Tree Protocol provides a loop-free network and redundant links to the core network with rapid convergence, to ensure faster recovery from failed links, enhancing overall network stability and reliability.
	IEEE 802.1s Multiple Spanning Tree Protocol runs STP per VLAN base, providing Layer 2 load sharing on redundant links.
	IEEE 802.3ad Link Aggregation Control Protocol (LACP) increases bandwidth by automatically aggregating several physical links together as a logical trunk and providing load balancing and fault tolerance for uplink connections.
	Comprehensive QoS
	4 egress queues per port enable differentiated management of up to 4 traffic types. Traffic is prioritized according to 802.1p and DSCP, giving optimal performance to real-time applications such as voice and video.
	Asymmetric bidirectional rate-limiting, per port or per traffic class, preserves network bandwidth and allowing maximum control of network resources.
	IEEE 802.3af PoE Features
	The SMC8126PL2-F supports max. 15.4 Watts per port over existing CAT 5 cables to distances of up to 100 meters. Port one to four can even support up to 31 Watts to power devices such as VoIP phones, wireless access points and surveillance cameras. By using Power over Ethernet the need for individual power sources is eliminated, saving on costs for power cable installation and avoiding power outlet availability issues later on.
	Enhanced Security
	Port Security allows access to switch ports based on MAC addresses, thus limiting the total number of devices using a switch port and protecting against MAC flooding attacks.
	IEEE 802.1x port-based or MAC-based access control ensures all users are authorized before being granted access to the network. User authentication is carried out using any standard-based RADIUS server.
	Access Control Lists (ACLs) can be used to restrict access to sensitive network resources by denying packets based on source and destination MAC addresses, IP addresses, TCP/UDP ports. This is done by hardware, so switching performance is not compromised.
	Security Shell (SSH) and Secure Sockets Layer (SSL/HTTPS) encrypt network management information via Telnet and web, providing secure network management.
	TACACS+/RADIUS Authentication enables centralized control of the switch and restricts unauthorized users from altering the configuration of the switch.
	Private VLAN isolates edge ports to ensure user privacy.
	Simplified Management
	The user friendly web interface helps new users to configure the switch quickly and easily. For advanced users an industry standard Command Line Interface (CLI) via console port or Telnet provides a common user interface and command set to configure the switch.
	Four groups of RMON are supported for traffic management, monitoring and analysis. When upgrading firmware or fine tuning configuration, dual software images and multiple configuration files can be used for backup. TFTP can be used to backup or restore firmware and configuration file.

Tech Specs

	Physical Ports
	20-ports 10/100/1000BASE-T (RJ-45)
	4-ports Gigabit combo (RJ-45/ SFP)
	2-ports Gigabit (SFP)1-port console (RJ-45)
	1 RPU connector (on the backside)
	Performance
	Switching Capability: 52Gbps
	Throughput: 38.7Mpps
	Packet Buffer Size: 512KBMAC
	Address Table: 8K
	Memory: 16MB Flash, 64MB SDRAM
	L2 Features
	Auto-negotiation for port speed and duplex mode
	Flow Control:
	IEEE 802.3x for full duplex mode
	Back-Pressure for half duplex mode
	Spanning Tree Protocol:
	IEEE 802.1D Spanning Tree Protocol (STP)
	IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
	IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
	Loop back detection
	Auto edge port
	BPDU filter/guardRoot guard
	VLANs:
	Supports 4K IEEE 802.1Q VLANs
	Port-based VLANs
	IEEE 802.1v Protocol-based VLANs
	Private VLAN
	VLAN trunking
	GVRP protocol for VLAN management
	Link Aggregation:
	Static Trunk
	IEEE 802.3ad Link Aggregation Control Protocol
	Trunk groups: 4, Trunk links: 2~8
	IGMP Snooping:
	IGMP v1/v2/v3 snooping
	IGMP Queried
	IGMP Filtering
	IEEE 802.3af Power over Ethernet (PoE)
	Maximum output power per port up to 15.4W, port 1-4 up to 31W
	Maximum PoE power budget 370W
	Provides power on all 24 ports
	LED indicators for power status per port
	Power on/off command for each port
	MVR (Multicast VLAN Registration)
	DHCP Option 82
	9K Jumbo frames
	Security
	IEEE 802.1X port based/ MAC-based access control/ Guest VLAN
	RADIUS authentication
	IP Source Guard
	TACACS+ 3.0 Access Control List (L2/L3/L4/IPv6)
	SSH (v1.5/v2.0)
	SSL
	QoS Features
	Priority Queues: 4hardware queues per port
	Traffic classification based on IEEE 802.1p CoS, IP and DSCP.
	Supports WRR and Strict scheduling
	Bandwidth Control:
	Egress rate limiting: 1 Mbps, 1Gbps
	Ingress rate limiting: 1Mbps, 1Gbps
	Management
	Switch Management:
	CLI via console port or Telnet
	WEB management
	SNMP v1, v2c, v3
	Firmware & Configuration:
	Dual firmware images
	Firmware upgrade via TFTP/FTP/HTTP server
	Auto upgrade via TFTP server
	Multiple configuration files
	Configuration file upload/download via TFTP server
	Diagnostic support TFTP download
	RMON (groups 1, 2, 3 and 9)
	BOOTP, DHCP for IP address assignment
	DHCP option 82 relay
	DHCP dynamic provision (option 66/67)
	SNTP Event/Error Log/Syslog Flow
	Dynamic ARP inspection (DAI)
	VLAN mirror
	MAC based mirror
	Auto Traffic Control (ATC)
	Delay reload
	Mechanical
	LED Indicators: Port, Uplink, System, Diagnostic
	Dimensions (H x W x D): 409 x 440 x 44 mm (1RU)
	Weight: 5.6Kg
	Maximum Power consumption : 430Watt
	Safety
	CSA/NRTL (UL1950, CSA 22.2.9.50)
	TUV/GS (EN60950)
	Electromagnetic Compatibility
	CE Mark
	FCC Class A
	Environmental Specifications
	Temperature:
	IEC 68-2-14
	0?to 40?(Standard Operating)
	-40?to 70?(Non-Operating)
	Humidity: 10% to 95% (Non-condensing)
	Vibration: IEC 68-2-36, IEC 68-2-6
	Shock: IEC 68-2-29
	Drop: IEC 68-2-32

BloomReach Content

LG-Ericsson TigerSwitch SMC8126PL2-F Ethernet Switch - 24 Port - 6 Slot - 24 x 10/100/1000Base-T - Power Over Ethernet - 4 x SFP (mini-GBIC), - 2 x SFP (mini-GBIC) SlotShow More +

Product Details:

Rakuten