Maxtor Atlas 73.50 GB 3.5 Internal Hard Drive

The Maxtor Atlas 10K V SAS delivers the industry's highest capacity point Serial Attached SCSI (SAS) drive with a 16MB cache, as fast as 4.0 msec seek time and 89MB/sec sustained data transfer rate, providing an optimal combination for use on mainstream enterprise solutions.

Features

	Drive Interface	SAS
	SAS Pin	7-pin
	Drive Interface Standard	3Gb/s SAS
	Buffer	16 MB
	Rotational Speed	10000 rpm
	Maximum External Data Transfer Rate	300 MBps (2.3 Gbps)
	Product Type	Hard Drive
	Manufacturer Part Number	8D073S0
	Manufacturer	Seagate Technology
	Product Name	Atlas 10K V SAS Hard Drive
	Product Line	Atlas
	Brand Name	Maxtor
	Weight (Approximate)	1.80 lb
	Drive Type	Internal
	Height	1.0"
	Width	4.0"
	Depth	5.8"
	Drive Height	1/3H
	Drive Width	3.5"
	Storage Capacity	73.50 GB
	Limited Warranty	5 Year

Tech Specs

	Form Factor	Internal
	Height	1.03"
	Width	4"
	Depth	5.79"
	Compatible Drive Bay Width	3.5"
	Compatible Drive Bay Height	1/3H
	Storage Capacity	73.50 GB
	Standard Warranty	5 Year Limited
	Buffer	16 MB
	Rotational Speed	10000 rpm
	Maximum External Data Transfer Rate	384 MBps
	Product Type	Hard Drive
	Manufacturer Part Number	8D073S0
	Manufacturer Website Address	www.seagate.com
	Manufacturer	Seagate Technology
	Product Name	Atlas 10K V SAS Hard Drive
	Product Line	Atlas
	Brand Name	Maxtor
	Additional Information	SAS Interface Bandwidth: 600 MB/s Bytes Per Sector: 512, 514, 516, 518, 520, 522, 524 MTTF: 1.4 million hours Case Temperature: 60 (°C) Maximum Operating Rotational Vibration: 25 (rad/sec2) Operating Rotational Shock: 7,000 (rad/sec2) Operating 25,000 (rad/sec2) Non-Operating Higher System Availability: Dual port provides two data paths to each disk drive increasing the drive's availability Multi-initiator capability enables multiple hosts to access a drive simultaneously Point-to-point connectivity for better fault isolation End User Flexibility: Configuration flexibility allow end-users to mix and match SAS and SATA drives to fit their specific application SAS back-planes can accommodate dual port / high performance SAS drives and/or high capacity / lower cost SATA drives Performance: Up to 128 queue depth support for improved IOPS performance Full duplex capability allow drives to send and receive data for two different IO operations simultaneously Point-to-point connectivity eliminates the bottleneck inherent with a shared/arbitrated bus Scalable bandwidth via wide ports Rate matching supports 1.5Gbs SATA and 3.0Gbs SAS drives for optimal performance SCSI Investment Protection: Employs the SCSI command set to maintain compatibility with existing SCSI infrastructures MaxAdapt Features: Adaptive Bias Estimation (ABE)-Maintains consistent performance by adjusting the bias applied to the actuator Virtual Cache Lines (VCL)-Allows dynamic assignment of cache segments Rotational Vibration Compensation (RVC)-Monitors and corrects for external vibration Atlas 10K V SAS Best-Fit: Large Enterprise NAS/SAN Servers Mainstream NAS/SAN Workstations Direct Attached JBOD Storage Direct Attached RAID Storage
	Certifications & Standards	S.M.A.R.T
	Weight (Approximate)	1.80 lb

BloomReach Content

Maxtor Atlas 73.50 GB 3.5" Internal Hard Drive - SAS - 10000 rpm - 16 MB Buffer - 8D073S0

Product Details:

Rakuten