No guesswork, green indicator lights confirm correct connection
No sparking or shorting, When clamps are attached the polarity is adjusted automatically
Built-in surge protector prevents damage to the vehicle computer and electronics
Textured grips and flexible cables are easy to handle, even in cold weather
12 Foot cables are constructed using heavy 8-gauge copper clad aluminum
Tech Specs
Four Step Process:
1.) With the ignition of both vehicles in the off position, connect one set of clamps to the assisting vehicle battery, one clamp to each battery terminal – polarity does not matter
2.) Connect the other set of clamps to the disabled vehicle battery – first clamp to the positive battery terminal and the second clamp to metal on the vehicle engine block/frame
3.) Both green indicator lights should illuminate on the center module – if not adjust the clamps until they do
4.) Start the assisting vehicle and allow to idle for about 30 seconds. Start the disabled vehicle. When it’s running, disconnect the clamp from the engine block/frame then disconnect the remaining clamps in any order
