 |
Network Protocol and Standards Compatibility: |
|
IEEE 802.3 10BASE-T Ethernet |
|
IEEE 802.3u 100BASE-TX Fast Ethernet |
|
IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
|
IEEE 802.3x full-duplex flow control |
|
Interfaces: |
|
GS724T: 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) |
|
GS716T: 16 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (Auto Uplink on all ports) |
|
2 Dual Personality SFP slots for fiber Gigabit Ethernet modules |
|
Administrative Switch Management: |
|
IEEE 802.1D Spanning Tree Protocol |
|
RFC 1157 SNMP v1, v2c |
|
RFC 1213 MIB II |
|
RFC 1643 Ethernet Interface MIB |
|
RFC1493 Bridge MIB |
|
Private Enterprise MIB |
|
Jumbo Frame Support (up to 9216 bytes) |
|
IEEE 802.1Q Tag VLAN |
|
GS716T: 64 Static VLANs |
|
GS724T: 128 Static VLANs |
|
IEEE 802.1p (Class of Service) |
|
DSCP - L3 QoS |
|
Port-based QoS (options High/Normal) |
|
Port Trunking - Manual as per IEEE802.3ad Link Aggregation |
|
DHCP client function |
|
Access Control: Trusted MAC |
|
Port mirroring (many-to-one) |
|
Port setting |
|
Web-based configuration, anywhere on the network |
|
Smartwizard Discovery Utility program auto discovers devices (up to 254 agents/switches); set system configuration to each agent |
|
Configuration backup/restore (easy to configure more than one switch) |
|
Password access control and Restricted IP Access List |
|
Firmware upgradeable |
|
Active Flow Control: |
|
Full-duplex IEEE 802.3x pause frame flow control |
|
Half-duplex back-pressure control |
|
Performance Specifications: |
|
Forwarding modes: Store-and-forward |
|
Bandwidth: GS724T = 48 Gbps, GS716T = 32 Gbps |
|
GS716T average latency 34.8 us for 100 Mbps with 64 bytes |
|
GS724T average latency 10.59 us for 100 Mbps with 64 bytes |
|
Buffer memory: 256 KB embedded memory per unit |
|
Priority queues: 4 |
|
Priority queuing: Weighted Round Robin (WRR) |
|
Address database size: 8,000 media access control (MAC) addresses per system |
|
Addressing: 48-bit MAC address |
|
GS716T = 59,500 hours (~6.8 years) |
|
GS724T = 59,500 hours (~6.8 years) |
|
GS724T = 41 dBA |
|
GS716T = 42.5 dBA |
|
LEDs: |
|
Unit: Power |
|
Per port: Link, activity, speed, duplex |
|
Power Supply: |
|
GS716T - 32W |
|
GS724T - 43.2W |
|
100-240V AC/50-60 Hz universal input |
|
Physical Specifications: |
|
GS716T: 43 x 440 x 205 mm (1.7 x 17.3 x 8.1 in) |
|
GS724T: 43 x 440 x 260 mm (1.7 x 17.3 x 10.2 in) |
|
GS716T: 3.5 kg (7.7 lb) |
|
GS724T: 3.6 kg (7.9 lb) |
|
Environmental Specifications: |
|
Operating temperature: 32° to 104°F (0° to 40° C) |
|
Storage temperature: -4° to 158°F (-20° to 70° C) |
|
Operating humidity: 90% maximum relative humidity, non-condensing |
|
Storage humidity: 95% maximum relative humidity, non-condensing |
|
Operating altitude: 10,000 ft (3,000 m) maximum |
|
Storage altitude: 10,000 ft (3,000 m) maximum |
|
Electromagnetic Compliance: |
|
CE mark, commercial |
|
FCC Part 15 Class A |
|
VCCI Class A |
|
EN 55022 (CISPR 22) |
|
EN 55024 (CISPR 24) |
|
C-Tick |
|
Safety Agency Approvals: |
|
UL listed (UL 1950)/cUL |
|
IEC 950/EN 60950 |
|
CE mark, commercial |
|
CUL 60950 (Listed)/EN 60950 (Low Voltage Directive) |
|
Modules: |
|
NETGEAR ProSafe AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable |
|
NETGEAR ProSafe AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable |
|
NETGEAR ProSafe AGM733 Fiber 1000BASE-ZX SFP GBIC Module with LC connectors for 9um single-mode fiber cable |
|
Warranty: NETGEAR Lifetime Warranty |
|
System Requirements: |
|
Category 5 UTP network cables or better |
|
Network card for each PC |
|
Network software (e.g., Windows®) |
