NETGEAR WG103 Prosafe 802.11G Wireless Access Point

Intelligent Networking Features for a Scalable, Secure Solution

High-speed IEEE 802.11g, up to 108 Mbps in turbo mode

Extensive Security features include WPA2, multiple BSSID, rogue AP detection, MAC address filtering and 802.1x with RADIUS support

Flexible AP placement with integrated 802.3af Power over Ethernet

Accepts high gain accessory antennas for greater coverage

Features

	High-speed IEEE 802.11g, up to 108 Mbps in turbo mode
	Extensive Security features include:
	WiFi Protected Access™ (WPA/WPA2), 802.11i
	Multiple BSSID
	Rogue AP detection
	MAC address filtering
	802.1x with RADIUS support
	WPA2 data encryption when using WDS bridging
	Disable/enable SSID broadcast
	Comprehensive SNMP functionality for advanced network management
	Quality of Service (QoS) with wireless multi-mode (WMM)
	Save battery power for clients with wireless multi-mode power save (WMM-PS)
	Deploy over large areas with Wireless Distribution System (WDS):
	Point-to-point bridging
	Point-to-multipoint bridging
	Repeating
	Client mode (future release)
	Accepts high-gain accessory antennas for greater coverage
	Sturdy metal chassis with Kensington Lock slot
	Plenum-rated for safe and convenient placement above drop-down ceilings
	Support for IEEE802.3af Power over Ethernet (PoE):
	Allows flexible AP placement not limited to outlet location
	Use full 100 meter distance of Ethernet cable
	Eliminates extra power cables

Tech Specs

	Physical Specifications:
	Dimensions: 158 x 101 x 29mm (6.22 x 3.97 x 1.14 in)
	Weight: 402.5 g (0.88 lb)
	Processor and Memory:
	Atheros®, 8 MB flash, 32 MB SDRAM
	Wireless:
	I EEE 802.11g 54 Mbps Wireless Access Point
	Antenna: 5 dBi, 2.4 GHz detachable
	Typical maximum transmit output power (varies based on country and/or region selection to ensure local regulatory compliance): 20 dBm
	Advanced Wireless Features:
	WDS point-to-point wireless bridge mode
	WDS point-to-multipoint wireless bridge mode
	WDS repeater mode
	Adjustable wireless output power
	Network Management:
	Remote configuration and management through Web browser, or SNMP (v1, v2c)
	Physical Interfaces:
	One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af�3; Power over Ethernet (PoE) support
	One (1) reverse SMA antenna connector
	Lighted Status LEDs:
	Power, test, LAN, and WLAN 802.11g
	Security:
	40-bit (also called 64-bit), 128-bit, Wired Equivalent Privacy (WEP) Encryption, WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK)
	Rogue AP detection
	IEEE 802.1x authentication
	MAC address filtering
	8 BSSID
	Kensington Lock slot for physical security
	Secure SSL browser connection
	Number of VLANs: 9
	Power:
	Power adapter: 12V DC, 1.0 A; plug is localized to country of sale
	PoE power consumption: 5W
	Warranty:
	Access point: NETGEAR Lifetime Warranty
	Power supply: NETGEAR 3-year Warranty

BloomReach Content

NETGEAR WG103 Prosafe 802.11G Wireless Access Point - WG103-100NAS