shop by
Category
items
0 

Peavey PVI 8B Professional Audio Mixer

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

150 watts into 4-ohm (2 x 8 ohm) speakers : 8 balanced XLR microphone inputs : Tape/CD inputs : Reverb level control on each channel : Line Out for connection to external amplifiers : Return input for connection of external effects processors : Record Out for taping : RF interference protection on all inputs : 3-PIN LOW-IMPEDANCE MICROPHONE INPUT - This input is for typical balanced, low-impedance microphones. It will automatically provide phantom power (15V) for condenser mics or active direct boxes. This has an input impedance of 1k ohms. The connector is wired as - Pin 1=shield; Pin 2=positive (hot); Pin 3=negative (cold). : 1/4 LINE/HIGH-IMPEDANCE INPUT - This input may be used as either a high-impedance microphone input or for line-level devices such as a cassette player, CD player, video projector or laptop. This will also allow connection from an electric guitar, bass or keyboard. It is a two-conductor input with an impedance of 10k ohms. : LEVEL CONTROL - The level control for each channel sends the signal to the master mix bus. Typical operation is between 4 and 8 (dependent upon the input devices) but should be lower than the master level. Please remember that this acts like a preamp, so if you are using a device that has a volume output control (i.e. - a tape or CD player) you will need to do some level matching by adjusting the level controls on each unit : TREBLE TONE CONTROL - This is used to adjust the overall tone of the individual inputs. Since it is a cut or boost control (+/-15 dB), it willadd or diminish presence frequencies in the sound beginning at 2 kHz : BASS TONE CONTROL - This is used to adjust the overall tone of the individual inputs. Since it is a cut or boost control (+/-15 dB), it will add ordiminish bass frequencies in the sound beginning at 300 Hz : REVERB CONTROL - This is used as a send control to the effects bus. It controls the amount of reverberation added to the input signals. : MASTER LEVEL - This controls the overall volume level of the entire amplifier. Typical operation is between 4 and 8. : EFFECTS VOLUME - This controls the level of the echo and delay that is added back to the master mix. : EFFECTS ECHO - This controls the character of the Reverb that is added back to the master mix. This is analogous with changing the rate at which the echo decays. : EFFECTS DELAY - This controls the delay of the Reverb that is added back to the master mix. Increase this control to simulate the effect of larger rooms : TAPE/CD VOLUME - This controls the level of the playback inputs (RCA jacks) : TAPE IN (L/R) - These RCA jacks are for connecting a cassette deck, CD player or other line-level source

Specifications

Manufacturer Peavey
Mfg Part# 00595560
SKU 211151253
UPC 014367128505
UPC 14 00014367128505
Features
1/4 LINE/HIGH-IMPEDANCE INPUT - This input may be used as either a high-impedance microphone input or for line-level devices such as a cassette player, CD player, video projector or laptop. This will also allow connection from an electric guitar,
150 watts into 4-ohm (2 x 8 ohm) speakers
3-PIN LOW-IMPEDANCE MICROPHONE INPUT - This input is for typical balanced, low-impedance microphones. It will automatically provide phantom power (15V) for condenser mics or active direct boxes. This has an input impedance of 1k ohms. The
8 balanced XLR microphone inputs
bass or keyboard. It is a two-conductor input with an impedance of 10k ohms.
BASS TONE CONTROL - This is used to adjust the overall tone of the individual inputs. Since it is a cut or boost control (+/-15 dB), it will add ordiminish bass frequencies in the sound beginning at 300 Hz
connector is wired as - Pin 1=shield; Pin 2=positive (hot); Pin 3=negative (cold).
EFFECTS DELAY - This controls the delay of the Reverb that is added back to the master mix. Increase this control to simulate the effect of larger rooms
EFFECTS ECHO - This controls the character of the Reverb that is added back to the master mix. This is analogous with changing the rate at which the echo decays.
EFFECTS VOLUME - This controls the level of the echo and delay that is added back to the master mix.
LEVEL CONTROL - The level control for each channel sends the signal to the master mix bus. Typical operation is between 4 and 8 (dependent upon the input devices) but should be lower than the master level. Please remember that this acts like a
Line Out for connection to external amplifiers
MASTER LEVEL - This controls the overall volume level of the entire amplifier. Typical operation is between 4 and 8.
preamp, so if you are using a device that has a volume output control (i.e. - a tape or CD player) you will need to do some level matching by adjusting the level controls on each unit
Record Out for taping
Return input for connection of external effects processors
REVERB CONTROL - This is used as a send control to the effects bus. It controls the amount of reverberation added to the input signals.
Reverb level control on each channel
RF interference protection on all inputs
TAPE IN (L/R) - These RCA jacks are for connecting a cassette deck, CD player or other line-level source
Tape/CD inputs
TAPE/CD VOLUME - This controls the level of the playback inputs (RCA jacks)
TREBLE TONE CONTROL - This is used to adjust the overall tone of the individual inputs. Since it is a cut or boost control (+/-15 dB), it willadd or diminish presence frequencies in the sound beginning at 2 kHz
loading
$279.99 + free shipping
Rakuten Super Points Earn 280 ($2.80) Rakuten Super Points™
What are Rakuten Super Points™?
Get rewarded when you shop! Earn 1 point per dollar spent. That's like getting cash back on every purchase. Easy to see matured points in checkout. Use points just like cash.
Learn More
Get this item for
(price with shipping)
(redeem points)
Condition: Brand New
In Stock. Usually Ships in 1 to 2 business days
Please select an option to buy
Add to Cart

Sold By:  BeachAudio
What is a Marketplace and Shop Owner?
  • Our marketplace is a platform where approved third-party retailers (Shop Owners) can sell their products
  • Items are sold and shipped by Shop Owners
  • Your credit card and personal information remain secure; Rakuten.com meets all PCI Security Standards.
  • Purchases can only be returned to the Shop Owner
  • All purchases receive Rakuten Super Points™
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details
ADVERTISEMENT
ADVERTISEMENT