Be the first to review this item and earn 25 Rakuten Super Points™
The PowerDsine 6006 Power over LAN Hub is connected to existing Ethernet or Fast Ethernet infrastructure and connects to standard Category 5 unshielded twisted-pair (UTP) and shielded twisted-pair (STP) cabling. By sending -48Vdc over 100 meters, Ethernet terminals - including IP phones, wireless LAN access points and Web-cameras - can utilize power provided from the PowerDsine 6006 Power over LAN Hubs. If a device is incompatible with the Power Hub, an external splitter is installed. The splitter separates the DC voltage and the Ethernet data signal into two separate wires, terminating at a power port and a RJ-45 jack.The PowerDsine 6006 Power over LAN Hub supports up to six Ethernet terminals. Multiple hubs can be deployed in the wiring cabinet to support more terminals providing a simple, cost effective method for expanding the network as requirements evolve. PowerDsine 6006 Power over LAN Hubs features 6 ports.Deploying Power over LAN in conjunction with a central UPS provides a cost-effective way to distribute back-up power and ensures uninterrupted operation of IP telephony even when main electrical power failures occur. IT managers can protect each IP phone with a small UPS, but the cost of installing and maintaining hundreds would be prohibitive.Normally, introducing DC into an Ethernet network would increase noise susceptibility of the system, thereby degrading the Ethernet signal. PowerDsine's state-of-the-art design ensures that power distribution does not interfere with concurrent network operation. The hub includes high-performance, robust RJ-45 shielded connectors, intelligent wiring layout and optimized line termination enabling the Power over LAN to operate as a fully integrated device for data communication and power.PowerDsine 6006 features a standard IEEE 802.3af auto-sensing algorithm, as well as backward compatibility to the pre-standard algorithm. This mechanism automatically detects Power-over LAN Ethernet terminals and supplies inline power. The per-port, sophisticated power control and monitoring circuit enables fast installation while ensuring continuous proper operation of devices, such as ordinary NICs that do not expect power on their Ethernet connection.The PowerDsine 6006 Power over LAN Hub is plug-and-play product. Once turned on, it automatically detects all Power over LAN Ethernet terminals and supplies inline power immediately, providing the terminal application is power-ready. All port interfaces are located on the front panel providing easy access.The standard 19", 1U Power over LAN Hub allows easy rack mounting while consuming minimal space in the wiring closet.PowerDsine 6006 provides real-time network monitoring through the front panel, including bi-color LED per port indicating normal and overload or short circuit conditions. Additional LED indicators are included for main power supply and internal self-test monitoring.