Quick Eagle 4200SDSL Ethernet Bridge - 4200SDSL

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Because Quick Eagle's 4200 SDSL Ethernet BridgeTM offers you up to 7 Mbps of bandwidth on three pairs of copper loops for distances up to 11,000 feet, it is ideal for transparently extending LANs and VLANs in campus network environments over dedicated standard copper pairs.

The 4200 SDSL Ethernet Bridge's multilink technology bonds all three SDSL links into a single multilink 'bundle' to offer load balancing and link resiliency. Using frame-based multiplexing the unit load balances traffic across the links to triple your bandwidth. When a link is out of service, the unit carries traffic on the remaining active links. The unit also detects when a link is operational and adds it back automatically to the multilink bundle.


Manufacturer Global Marketing
Mfg Part# 4200SDSL
SKU 10346076
UPC 870282000766
UPC 14 00870282000766
Total Number of Network Ports 3
Port/Expansion Slot Details 1 x Ethernet Network
Product Type Ethernet Switch
Manufacturer Part Number 4200SDSL
Manufacturer Quick Eagle Networks
Product Name 4200SDSL Ethernet Bridge
Brand Name Quick Eagle
Network Technology 10Base-T
Ethernet Technology Ethernet
Media Type Supported Twisted Pair
Layer Supported 2
Weight (Approximate) 5 lb
Form Factor Rack-mountable
Height 1.6"
Width 12.4"
Depth 8.8"
Power Source Power Supply
Manageable Yes
Limited Warranty 2 Year
Tech Specs
Status Indicators Front Panel LEDs: Power/Test 3 SDSL Links Ethernet
Number of Ports 3
Ethernet Port Yes
Altitude 10000 ft Maximum
Humidity 0% to 95% Non-condensing Relative Humidity Operating
Temperature 32°F (0°C) to 122°F (50°C) Operating / -4°F (-20°C) to 140°F (60°C) Storage
Product Type Ethernet Bridge
Manufacturer Part Number 4200SDSL
Manufacturer Website Address www.quickeagle.com
Manufacturer Quick Eagle Networks
Product Name 4200SDSL Ethernet Bridge
Brand Name Quick Eagle
Modules Not Applicable
Connectivity Media Category 3 UTP
Additional Information Line Code: 2B1Q System Timing: Internal or network Spectrum: 0 to 784 Khz Frame Relay: End-to-end frame-based inverse multiplexing Diagnostics: Loopback Tests: NET loopback Network Alarms: SNR margin, NET carrier loss
Certifications & Standards IEEE 802.1Q RFC 1490: Multiprotocol encapsulation over Frame Relay MIB II (RFC 1213) Frame Relay MIB QEN Enterprise MIB Regulatory: FCC Part 15, UL 1950 Third edition Industry Canada CS-03, VCCI Class 1 CAN/CSA C 22.2 No. 950-95 European Harmonized Standards 74/23 EEC91.31/EED, 89/336/EED, 93/68/EEC, and 91/263/EEC Commission Federal de Telecommunicaciones CISPR 22 Level B (EN55022) IEC 60950
Layer Support 2
Dimensions 1.63" Height x 12.38" Width x 8.75" Depth
Weight (Approximate) 5 lb
Form Factor Rack-mountable
Input Voltage 110 V AC / 220 V AC
Power Source Power Supply
Frequency 50 Hz or 60 Hz
Power Consumption 9 W @ Maximum
Input Voltage Range 100 V AC to 240 V AC
Management RMON-2: Application, top talker, and protocol performance monitoring In conjunction with ChoiceView Plus you can display the real-time and history performance statistics gathered by RMON-2 SNMP Agent In-band: In-band management through SDSL, or Ethernet Telnet: Device configuration
Security Features VLAN Support
Manageable Yes
Additional Warranty Information During the first three months Quick Eagle Networks will replace defective equipment at no charge. During the remainder of the warranty period, Quick Eagle Networks will repair defective products at no charge. However, a diagnostic charge may be applied if Quick Eagle Networks test engineers determine that the returned product was not defective
Parts Warranty/Labor 2 Year
Standard Warranty 2 Year
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details