I had reviewed several LCD mounts and this mount was the one that won my purchase. First of all you can not beat the price through the net, local store wanted 200+ for same. It comes with all hardware to mount it to the wall (as long as it is not concrete) and mount to any VESA compatible LCD monitor. Second of all it is not difficult to mount the base plate to the wall (I highly recommend you measure the set you will mount before you mount the base to the wall, you will be grateful you did).
Third this thing can hold some weight, I mounted a 32" monitor to it and I use it as a computer monitor and a TV which I swing to a different position to view. This position extends the arm at full length from the wall and allows me to swivel it a full 90 degrees with 2" of clearence from the wallwhen in final position. Not one single creak or sound from the mount, this is a relief since it would really stink if it ripped out of the wall. The only compliant and the reason why a gave a 4 for satisfaction is that the mount screws for the base plate are smaller than the holes they pass through on the base plate leaving room for movement regardless how tight you tighten the mount screws. I recommend two things for this. 1 - make sure you mount the top and bottom screws opposite of each other and off center ( you will understand when you look at the base plate). 2 - go out and purchase 3 star washers and place one between the base plate and flat washer of each base plate screw. This will keep the base plate from sliding under the flat washers and wallowing out the holes over time when you swing the mount from one position to another.