$10 off $30 for New Registering Customers. Use promo code NEW10 at checkout. Ends 7/14/2014.
|The Simmons DA200S houses a 100-watt low-frequency amp with two 50-watt mid- and high-frequency amps. The low-frequency amp powers a heavy-duty 12" down-firing sub-woofer speaker and a specially designed slot port for bottom-end projection. Left and right mid- and high-frequency amps drive 2-6-1/2" mid-range speakers and 2-1/2" high-frequency tweeters.The DA200S maintains the integrity of the stereo drum signal from input to speakers (including line outs and extension speaker jacks). This provides a broad stereo field that positions your drums at their correct sonic locations, providing a realistic audio experience for you and your audience, whether you're in the studio or playing live.General featuresSoft touch knobs (adjustable with your drum stick)Ribbed handle for easy transportProtective, long-lasting carpet coveringHigh-frequency tweeters for cymbal clarityHeavy-duty midrange speakers for punchy mid-frequency responseHeavy-Duty 12" Down-firing sub-woofer for enhanced bass response (internal)Heavyweight steel grilleSlot-port for enhanced cabinet with efficiency and bottom-end projection Front panel featuresDrum Inputs: 1/4" input jacks (left and right)Aux Input: 1/4" stereo jack used for connecting any pre-EQ source such as a click track, additional digital instruments, devices, drum pad MPC machines, etc.Drum Volume to control the volume level of the Drum Inputs to the power amplifierAux Volume to control the volume level of the Aux InputEqualization section with low, mid, and high knobs to control the overall toneSub controls the volume of the low frequency sub-wooferMaster: This controls the overall volume of the amplifierLine In: 1/8" stereo line input which bypasses the EQ tone controls and feeds straight into the power amplifier, perfect for using CD or MP3 players to play along withHeadphone Jack: 1/8" stereo output jack which combines all inputs from your drums, Aux Input, and Line In for monitoring your drums during live performances Back panel features:Left and Right Line Outs: balanced XLR Line Outs provide quiet, noise-free signal flow through a standard mic cable or snake to a recording or live consoleVolume Control for Line Outs: completely independent from the Master volume on the front panel, allowing you to set your feed level to a mixing consoleGround Lift: to eliminate hum or buzz that may exist if there is a ground loop created between any stage gear and the PA systemExtension Speakers Jacks: deliver the full 200 watts of power to the internal speakers. In addition, you may use these jacks with un-powered speakers to widen your stereo field for the midrange and high frequencies|