 |
Ports |
2 x Serial |
1 x IEEE 1284 (EPP/ECP) Parallel |
1 x PS/2 Keyboard |
1 x PS/2 Mouse |
2 x RJ-45 Network |
1 x VGA |
|
Graphics Controller |
Intel Extreme Graphics |
|
Product Type |
Barebone System |
|
Manufacturer Part Number |
SYS-5013G-I |
|
Manufacturer Website Address |
www.supermicro.com |
|
Manufacturer |
Supermicro Computer, Inc |
|
Product Name |
SuperServer 5013G-i Barebone System |
|
Product Line |
SuperServer |
|
Brand Name |
Supermicro |
|
Expansion Slots |
1 x 32-bit -33 MHz PCI Occupied |
|
Expansion Bays |
2 x 3.5" Internal |
|
Keyboard Features |
Not Applicable |
|
Pointing Device |
Not Included |
|
Keyboard |
Not Included |
|
Maximum Memory |
2 GB Unbuffered DDR SDRAM Non-ECC Dual-channel |
|
Standard Memory |
Not Included |
|
Memory Slots |
184-pin DIMM (2 Free) |
|
Additional Information |
Processor: Single mPGA478 ZIF Sockets Supports an Intel Pentium 4 processor with 512KB of integrated Advanced Transfer Cache up to 2.8GHz Supports an Intel Celeron processor with 128KB of integrated Advanced Transfer Cache up to 2.2GHz 533 / 400MHz system bus Memory: Memory must be populated in pairs Memory Type: DDR333/266/200 DIMM Sizes: 256 MB, 512 MB, 1 GB Memory Voltage: 2.5 V only Input / Output: Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Up to 6 USB ports 1 Infrared port header 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support BIOS Type: 4Mb Flash EEPROM with AwardBIOS PC Health Monitoring: CPU: - Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.1V-1.85V
- Adjustable CPU clock frequency ratio settings (via BIOS)
FAN: - Total of four 3-pin fan headers
- 3x fans with tachometer monitoring
- Status monitor with firmware/software on/off control
Temperature: - Monitoring for CPU, chassis, environment
- CPU thermal trip support
LED: - CPU Overheat LED
- System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
Other Features: - Chassis intrusion detection
- Chassis intrusion header
|
|
Package Contents |
1 x SuperServer 5013G-i 1 x Super P4SGE Motherboard 1 x 1U SC810 Chassis (beige) 1 x IDE Cable 2 x IDE Drive Tray 1 x 100mm Blower Fan 2 x 1U Pentium 4 CPU Retention with Mounting Plate 1 x 1U Passive Heatsink 1 x 1U 24" Rail Kit 1 x Panasonic 3.5" 1.44MB Slim Floppy Drive 1 x Slim 24x TEAC CD-ROM Drive 1 x EFA250 1U 250W Power Supply 1 x 32-bit 1U Riser Card |
|
Network |
2 x Intel 82540EM Gigabit Ethernet 10/100/1000Mbps Integrated |
|
Dimensions |
1.70" Height x 17.50" Width x 22.60" Depth |
|
Weight (Approximate) |
34 lb - Gross |
|
Case Style |
1U |
|
Input Voltage |
100 V AC to 240 V AC |
|
Optical Drive Speed |
24x CD-ROM |
|
Optical Drive |
CD-Reader - CD-ROM |
|
Removable Storage Drives |
3.5" 1.44 MB Floppy Drive |
|
Cache |
Not Applicable |
|
Chipset |
Intel 845GE |
|
Processor Support |
Intel Pentium 4 Up to 3.06 GHz |
Intel Celeron Up to 2.20 GHz |
|
Total Processor Support |
1 |
|
Bus Speed Support |
Not Applicable |
|
Software Included |
Not Included |
|
Operating System |
Not Included |
+-+Gigabit+Ethernet+-+1U "Pin It")
