Be the first to review this item and earn 25 Rakuten Super Points™
Supersonic high-solids buffing compound and high-speed burnishing creates spectacular, gleaming floors. The same heat activated ingredients found in MARK THANE PLUS are blended with solvents, special cleaners and lubricating agents for simple, 1-step floor maintenance. Supersonic reduces pad drag and chemically removes black heel marks, dirt, and grime while it adds a film of plasticized polymer to the foundation coat. A good high-speed system that includes Supersonic spray buff will extend the time between stripping and refinishing indefinitely. Savings in time, labor, and product costs. You FTll realize even more savings at pad clean-up time. Pads used with Supersonic wash out easier and last longer than pads used in dry buffing operations. Spray buffing does much more than enhance gloss - it repairs, resurfaces, and reduces floor maintenance costs. For Institutional And Industrial Use Only. Warning May be harmful or fatal if swallowed. May cause skin and eye irritation. Combustible. Contains petroleum distilates. Do not use near heat, spark, or flame. If swallowed do not induce vomiting. Call a physician immediately. If skin contact occurs, wash with soap and water. See caution statement on right panel. Keep Out Of Reach Of Children. 1 Gallon (3.785 Liters). Directions For Use 1. Dustmop floor to remove grit and dust. 2. Dilute Supersonic high-solids spray buff compound 1-1 with water and pour solution into a trigger sprayer device. 3. Apply a mist of Supersonic spray buff compound solution to the floor just ahead of your high-speed machine. Spray and buff as needed to remove black heel marks and polish to a brilliant shine. Use a cleaning pad on heavily soiled or scratched floors. Turn or change pad when it becomes dirty. When floor is clean, use a white pad and polish to a high-gleaming shine.