Transition Networks Fast Ethernet Point System Slide-In-Module Media Converter - CFETF1013-105

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

With Transition Networks' full-featured 100BASE-TX to 100BASE-FX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before.


Manufacturer Transition Networks
Mfg Part# CFETF1013-105
SKU 10320148
UPC 648177008360
UPC 14 00648177008360
Number of Network (RJ-45) Ports 1
Network (RJ-45) Yes
Number of SC Ports 1
Total Number of Ports 2
SC Port Type Duplex
Product Type Transceiver/Media Converter
Manufacturer Part Number CFETF1013-105
Manufacturer Transition Networks, Inc
Product Model CFETF1013-105
Product Name Fast Ethernet Point System Slide-In-Module Media Converter
Brand Name Transition Networks
Maximum Distance Supported 1.24 Mile
Media Type Supported Twisted Pair / Optical Fiber
Fiber Mode Supported Multi-mode
Network Technology 100Base-TX / 100Base-FX
Ethernet Technology Fast Ethernet
Weight (Approximate) 8 oz
Height 3.4"
Width 3.4"
Depth 5"
Limited Warranty Lifetime
Tech Specs
Status Indicators Unit LED: PWR: Indicates that DC power is connected Port LEDs: TX (Link Copper): ON indicates TP link, Blinking indicates TP receive FX (Link Fiber): On indicates fiber link, Blinking indicates Fiber receive
Interfaces/Ports 1 x RJ-45 / 1 x SC Duplex
Number of Ports 2
Altitude 0 ft to 10000 ft Operating
Humidity 5 to 90% Non-condensing Operating
Temperature 32°F (0°C) to 140°F (60°C) Operating / -4°F (-20°C) to 185°F (85°C) Storage / -4°F (-20°C) 185°F (85°C) Storage
Product Type Media Converter
Manufacturer Part Number CFETF1013-105
Manufacturer Website Address
Manufacturer Transition Networks, Inc
Product Name Fast Ethernet Point System Slide-In-Module Media Converter
Brand Name Transition Networks
Connectivity STP/UTP / Fiber
Connectivity Media 100Base-TX Category 3, 5 STP/UTP / 100Base-FX 1300 nm Multi-mode Fiber
Distance Support 1.24 Mile
Additional Information Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times. N-Way Auto-Negotiation: Only Transition Networks guarantees compatibility with any 10/100-compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration. Link Pass Through: Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. 3-position Jumper: Hardware: Converter mode is determined by 4-position switch settings below. Software: Converter mode is determined by most recently saved on-board microprocessor settings. 4-position Switch: Auto-Negotiation (UP = enabled): Allows detection of, and adaptation to, fullduplex or half-duplex mode in device attached to copper link Link Pass Through (UP = enabled): Allows a fault EITHER on the copper OR on the fiber side of the media converter to stop signal and data transmission on the other side. AutoCross (UP = enabled): Allows straight-through twisted pair cable to be used for crossover connections. Fiber Optic Connector: Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.0 dB
Certifications & Standards IEEE® 802.3 UL Listed C-UL Listed (Canada) CE Mark FCC Class A CISPR Class A VCCI Class 1 FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A) FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B)
Network Technology 100Base-TX / 100Base-FX
Dimensions 3.40" Height x 3.40" Width x 5" Depth
Weight (Approximate) 8 oz
Input Voltage 7.5 V DC to 15.9 V DC
Power Consumption 3.40 W Operating
Protocols Fast Ethernet / SNMP / RMON
Management Using SNMP: Use SNMP at an attached terminal or at a remote location to: - Monitor media converter by monitoring: - Media Converter Power - Twisted-pair Link Status - Fiber Link Status - Hardware Switch settings - Fault Condition Enter network commands that: - Enable/disable Full/Half-Duplex. - Enable/disable LPT. - Power Down Media Converter.
Additional Warranty Information Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable. This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.
Parts Warranty/Labor - Lifetime
Standard Warranty Lifetime Limited
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details