Transition Networks Point System T1/E1 Copper to Fiber Media Converter - CSDTF1012-105

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Transition Networks CSDTF1012-105 media converter, designed to be installed into the Transition Networks PointSystem chassis, encode and decode T1 or E1 twisted pair copper signals over fiber optic cable to extend the distance and transmission reliability of high-speed T1 or E1 data traffic. The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations. It is designed to be installed in pairs.

Specifications

Manufacturer Transition Networks
Mfg Part# CSDTF1012-105
SKU 10321813
UPC 648177008513
UPC 14 00648177008513
Features
Number of Network (RJ-45) Ports 1
Network (RJ-45) Yes
Number of ST Ports 1
Total Number of Ports 2
ST Port Type Duplex
Product Type Transceiver/Media Converter
Manufacturer Part Number CSDTF1012-105
Manufacturer Transition Networks, Inc
Product Model CSDTF1012-105
Product Name Point System T1/E1 Copper to Fiber Media Converter
Product Line Point System
Brand Name Transition Networks
Maximum Distance Supported 4.97 Mile
Media Type Supported Twisted Pair / Optical Fiber
Fiber Mode Supported Single-mode
Network Technology T1/E1
Form Factor Internal
Height 3.4"
Width 3.4"
Depth 5"
Limited Warranty Lifetime
Tech Specs
Status Indicators PWR (Power) SDC (Signal Detect/Copper) SDF (Signal Detect/Fiber)
Interfaces/Ports 1 x RJ-45 / 1 x ST Duplex
Number of Ports 2
Product Type Media Converter
Manufacturer Part Number CSDTF1012-105
Manufacturer Website Address www.transition.com
Manufacturer Transition Networks, Inc
Product Name Point System T1/E1 Copper to Fiber Media Converter
Product Line Point System
Brand Name Transition Networks
Connectivity Twisted Pair / Fiber
Connectivity Media T1/E1 Twisted Pair / T1/E1 1310 nm Single-mode Fiber
Distance Support 4.97 Mile
Additional Information Switch selectable RJ-45 connectors for T1 or E1 Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 twisted pair environment 3-position Jumper: Hardware: Converter mode is determined by 4-position switch settings Software: Converter mode is determined by most recently saved on-board microprocessor settings Local or remote command operations include: Loop-back Copper & Fiber AIS transmitted on Fiber on loss of Copper link AIS transmitted on Copper on loss of Fiber link Boot-load firmware
Compatibility Point System Chassis
Certifications & Standards ITU-T ANSI AT&T ETSI Compliance: UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Class A CE Mark
Network Technology T1/E1
Dimensions 3.40" Height x 3.40" Width x 5" Depth
Form Factor Internal
Power Consumption 6 W
Management Remote unit "in-band" management Report local or remote converter status: Copper & Fiber Link status Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW AIS detected Copper & Fiber Model Number Copper & Fiber Connector
Standard Warranty Lifetime
loading
Sold Out
Sorry, you missed the deal!
This product is currently not available.
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details
ADVERTISEMENT
ADVERTISEMENT