Transition Networks T1/E1 Point System Slide-In-Module Media Converter - CSDTF1015-105

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them in-band from admin locations.


Manufacturer Transition Networks
Mfg Part# CSDTF1015-105
SKU 10380520
UPC 648177008544
UPC 14 00648177008544
Number of Network (RJ-45) Ports 1
Network (RJ-45) Yes
Number of SC Ports 1
Total Number of Ports 2
Product Type Transceiver/Media Converter
Manufacturer Part Number CSDTF1015-105
Manufacturer Transition Networks, Inc
Product Model CSDTF1015-105
Product Name T1/E1 Point System Slide-In-Module Media Converter
Brand Name Transition Networks
Maximum Distance Supported 24.85 Mile
Media Type Supported Twisted Pair / Optical Fiber
Fiber Mode Supported Single-mode
Network Technology T1/E1
Form Factor Internal
Height 3.5"
Width 3.5"
Depth 5"
Limited Warranty Lifetime
Tech Specs
Status Indicators PWR (Power): Steady green LED indicates connection to external AC power SDC (Signal Detect/Copper): On indicates twisted pair link is up SDF (Signal Detect/Fiber): On indicates fiber link is up
Interfaces/Ports 1 x RJ-45 / 1 x SC
Number of Ports 2
Altitude 0 ft to 10000 ft
Humidity 5 to 95% Non-condensing
Temperature 32°F (0°C) to 122°F (50°C) Operating / -4°F (-20°C) to 185°F (85°C) Storage
Product Type Media Converter
Manufacturer Part Number CSDTF1015-105
Manufacturer Website Address
Manufacturer Transition Networks, Inc
Product Name T1/E1 Point System Slide-In-Module Media Converter
Brand Name Transition Networks
Connectivity STP/UTP / Fiber
Connectivity Media T1/E1 STP/UTP / T1/E1 1300 nm Single-mode Fiber
Distance Support 24.85 Mile
Additional Information Converts the copper ports on T1/E1 devices, such as a PBX or T1/E1 Router, to single mode fiber. Switch selectable RJ-45 connectors for T1 or E1. Jitter attenuators optimize Bit Error Rate (BER) performance. Loopback switch facilitates installation. Network debug procedures make BER testing more convenient. Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link. Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 environment. Contacts will be activated on loss of power or loss of fiber link. An LED provides Alarm Indication Signal (AIS) indication Fiber Optic Connector Specs: Min TX PWR: -8.0 dBm Max TX PWR: -2.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -7.0 dBm Link Budget: 26.0 dB
Compatibility Point System Chaisis
Certifications & Standards ITU-T ANSI AT&T ETSI UL Listed C-UL Listed (Canada) CE Mark EN 55022:1994 EN 55024:1998 FCC Part 15 Class A EN 60950 A4:1997 UL 1950
Network Technology T1/E1
Dimensions 3.50" Height x 3.50" Width x 5" Depth
Form Factor Internal
Power Consumption 6 W
Management SNMP
Additional Warranty Information Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable. Transition Networks will, at its option: Repair the defective product to functional specification at no charge Replace the product with an equivalent functional product Refund the purchase price of a defective product
Standard Warranty Lifetime Limited
Sold Out
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
  •  custom promo
    5% Back* Sitewide with Promo Code Rewardme *See page for details