TRENDnet TPE-103I Power over Ethernet (PoE) Injector

The Power over Ethernet Injector, model TPE-103I, combines electrical power with a Fast Ethernet network connection to produce a Power over Ethernet (PoE) signal.

Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.

No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network.

Features

	Full Duplex Fast Ethernet speeds supported
	Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
	Save on installation and equipment costs
	Create an integrated PoE and non-PoE network
	Easily install a PoE device where a power outlet is not available
	Reduce installation and network equipment costs
	Safeguards network devices with short circuit protection
	Plug and Play in remote location
	Light weight and compact size
	Wall mounting points
	3-year limited warranty

Tech Specs

	Standard	IEEE 802.3 10Base-T


	Network Media	10Mbps: UTP/STP Cat. 5 and 5e up to 100 Meters

	Ports

	Data Lines	Pair 1: Pin 1, 2

	Power Input:	100~240V, 50~60Hz, 0.4A max.
	Output:	48V DC, 0.4A 18W max.
	Power Consumption	Max. 15.4 Watts
	Dimensions (W x D x H)	70 x 45 x 25mm (2.75 x 1.8 x 1 in.)
	Weight	45 g (1.6 oz.)
	Temperature	Operation: 0°C~50°C (32°F~ 122°F)

	Humidity	Max. 90% (non-condensing)
	Certifications	CE, FCC

BloomReach Content

TRENDnet TPE-103I Power over Ethernet (PoE) Injector

Product Details:

Rakuten