 |
1 x 10/100Mbps Auto-MDIX RJ-45 port |
|
SD/SDHC card slot * |
|
BNC video out and video in connectors |
|
Audio support : built-in Audio jacks for additional 3rd party microphone and speaker |
|
Input/Output ports (GPIO) to network to alarm systems |
|
Diagnostic Power and Link LEDs |
|
Four installation mounting points |
|
3x digital zoom |
|
Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes |
|
High quality H.264, MPEG-4, and MJPEG video recording |
|
Resolution up to 704 x 576 pixels and up to 30 frames per second (fps) |
|
Stream Internet camera video to a 3GPP compatible wireless device |
|
Dynamic DNS support |
|
Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC) |
|
Time, date, and other text overlays |
|
Mask overlays conceal sensitive areas |
|
Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols |
|
Recording type: continuous, schedule, or motion detection |
|
Record streaming video to your computer or Network Storage device with Samba support |
|
Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP |
|
Event trigger: motion detection or Input/Output signal |
|
Event response: email alert, instant snapshot, or video recording |
|
Send instant messages to Jabber client via Jabber Server |
|
Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP) |
|
Quick Universal Plug and Play (UPnP) installation |
|
3-year limited warranty |
|
*SD/SDHC card sold separately |
|
Package Contents |
|
TV-VS1 |
|
Multi-language Quick Installation Guide |
|
CD-ROM (Utility & User’s Guide) |
|
Network cable (1.8 m / 6 ft.) |
|
GPIO Connector |
|
Audio and cable (3.5 mm) |
|
Power adapter (12 VDC, 1.5 A) |
|
Mounting kit |
|
General |
|
Video: |
|
Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter |
|
Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter |
|
Audio: |
|
Line In: 3.5mm jack ( CCTV audio) |
|
Line Out: 3.5mm jack (Speaker) |
|
S/N Ratio: < 60dB |
|
Codec: PCM/AMR |
|
2 Way audio supported |
|
GPIO: Ground, GPIO in/out, DV12V output, RS485 TX+/TX- |
|
SD Slot: Supports SD/SDHC (up to 32GB) |
|
Pan/Tilt/Zoom: |
|
Protocol: Pelco D, Pelco P |
|
32 presets |
|
Auto Patrol |
|
Hardware |
|
Network: IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX |
|
LED: Power, Link |
|
Reset Button: |
|
Push and release to reboot |
|
Push and hold for 5 seconds to restore to factory default |
|
Power Consumption: 7 Watts |
|
Power: 12V, 1.5A external power adapter |
|
Dimension: 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.) |
|
Weight: 430 g (15.2 oz.) |
|
Temperature: |
|
Operating: 0°C ~ 45°C (32°F ~ 113°F) |
|
Storage: -15°C ~ 60°C (5°F ~ 140°F) |
|
Humidity: Max. 85% (non-condensing) |
|
Certifications: CE, FCC |
|
Requirement |
|
Management Interface: Internet Explorer 6.0 or above |
|
To run Utility: Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit) |
|
Network Protocols: TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP |
|
Management |
|
Remote: Remote management supported |
|
Backup / Restore: Save/retrieve configuration files |
|
Settings |
|
Image: Brightness, contrast, saturation, Hue, WDRC (Wide Dynamic Range Correction) |
|
Video Encoder: |
|
Encoding type: H.264, MPEG4, MJPEG |
|
Resolution/Frame rate(auto-sensing) |
|
704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC) |
|
704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL) |
|
Compression: 5 levels |
|
Recording: Recording type: continuous, schedule, or motion detection |
|
Port Settings: HTTP port: 80 (default), RTSP (554) |
|
Digital Zoom: 3x |
|
Dynamic DNS: Yes |
|
Time: Synchronize with NTP server or set time/date manually |
|
SMTP: Supported up to 2 destination email accounts |
|
System Log: 100 entries |
