Tripp Lite PDUB30 PDU - PDUB30

Customer Reviews   Write a Review

Be the first to review this item and earn 25 Rakuten Super Points™

Product Overview

Tripp Lite’s Hot-swap PDU systems enable live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads. Dual input power cables support PDU connection to separate Utility and UPS power sources. Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS. Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is up and running with all data and electrical connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment.

PDUB30 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to 3000VA with a NEMA L5-30P input plug. Pair of attached L5-30P PDU input cables connect to separate Utility and UPS power sources. 6 5-15/20R and 1 L5-30R outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite Rackmount UPS (select installations, see manual)

Specifications

Manufacturer Tripp Lite
Mfg Part# PDUB30
SKU 215782150
UPC 037332153890
UPC 14 00037332153890
Features
Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads
PDUV30 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to 3000VA or 2880 watts with a NEMA L5-30P input cable
2U horizontal rackmount form factor compatible with 2 or 4 post racks
Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations, see manual)
Pair of attached L5-30P PDU input cables connect to separate Utility and UPS power sources
6 5-15/20R and 1 L5-30R outlets support critical networking loads in both Utility and UPS operating modes
One additional L5-30R pass-through outlet supports UPS input power cord
Dual input power cables support PDU connection to separate Utility and UPS power sources
Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS
Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS
Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one
Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment
Tech Specs
Model Type Hot-Swap
Voltage compatibility 100-127V
Output Watt Capacity (watts) 2880
Frequency compatibility 50 / 60 Hz
Output nominal voltage 100V, 120V, 127V
Outlet quantity / type 6 NEMA 5-15/20R and 1 L5-30R outlets support critical connected loads; 1 designated pass-through L5-30R outlet supports UPS L5-30P input plug
Recommended Electrical Service Compatible with 100-127V UPS systems rated to 3000VA that use a L5-30P input plug
Maximum input amps 24A
Input connection type UTILITY & UPS input line cords both fitted with NEMA L5-30P input plug
Input cord length (ft.) Utility input cable (10 ft / 3m) / UPS input cable (6 ft / 1.8m)
Switches Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6 milliseconds
Front panel LEDs Lighted indicators confirm UPS and Utility switch position and operating mode
Shipping weight (lbs) 11
Shipping weight (kg) 5
Unit Dimensions (HWD/in) 3.42 x 17.32 x 3.03
Unit Dimensions (HWD/cm) 8.7 x 44 x 7.7
Shipping Dimensions (HWD/in) 9.25 x 20.23 x 6.1
Shipping Dimensions (HWD/cm) 23.5 x 51.4 x 15.5
Unit weight (lbs) 7.7
Unit weight (kg) 3.5
Material of construction Steel
Style Rackmount
Form factors supported 2U rackmount in 2 or 4 post racks
Relative Humidity 0-95% non condensing
Certifications Tested to UL60950 (USA), CSA (Canada)
Product Warranty Period (U.S., Canada & Puerto Rico) 2 years
Product Attributes
Environmental Certification RoHS
loading
Sold Out
Sorry, you missed the deal! This product is currently not available.
ADVERTISEMENT
Promotions & Offers (1)
  •  custom promo
    Enter for a chance to win 10,000 Rakuten Super Points™ (a $100 value!) *See page for details
ADVERTISEMENT
ADVERTISEMENT