Do you need an efficient, cost-effective way to distribute, monitor and manage power in an IT or industrial environment? Tripp Lite's PDUMH20AT Metered Power Distribution Unit with ATS is the solution you seek! It provides sixteen outlets plus a digital meter that displays continuous power consumption, enabling IT personnel to monitor the PDU's load on site. Optional integrated automatic transfer switching capability enables dual AC input redundancy for critical network hardware, hot-swappable UPS maintenance bypass or dual UPS protection. The PDUMH20AT accepts an optional SNMPWEBCARD accessory (sold separately) that enables it to be permanently upgraded to a switched PDU. The PDUMH20AT features an all-metal housing and a switchless design to prevent accidental shutoff. It is suitable for 1U rackmount installation as well as wall-mount, workbench, under-counter and similar installations.
Tripp Lite's PDUMH20AT Metered Power Distribution Unit with ATS:
Ideal for network, IT and industrial environments
Automatic transfer switching (ATS) provides a redundant power option
16 NEMA 5-15/20R outlets
Digital meter for on-site monitoring of total PDU load
Optimized for Demanding Applications The PDUMH20AT is designed for reliable distribution of AC power to supported equipment in IT, industrial and similar applications. It features a rugged all-metal case, high-quality outlets, a 20A circuit breaker and a switchless design to prevent accidental shutoff. Auto-Transfer Switching function adds hot-swap and maintenance bypass ability to standard UPS configurations.
Reliable IT Power Distribution Unfiltered electrical pass-through makes the PDUMH20AT ideal for distributing alternate waveform UPS or generator power in rack enclosures and network closets. It provides sixteen 5-15/20R outlets and dual 12-ft. cords (one attached, one detachable) with locking L5-20P plugs to prevent accidental disconnection. Two included L5-20R to 5-20P plug adapters enable the PDU to be connected to standard 5-15/20R outlets.
Integrated Auto-Transfer Switching & Hot-Swap Capability The PDUMH20AT features optional integrated automatic transfer switching (ATS) capability to provide a redundant power option for networking and server applications with non-redundant internal power supplies. In ATS mode, the attached power cord delivers primary input power and the included detachable power cord provides secondary input power. If primary power becomes unstable or fails, the PDU automatically switches to the secondary power source. Additionally, ATS enables fault-tolerant hot-swappable UPS protection when used with a single UPS system, and fully redundant UPS protection when each power cord is connected to a separate UPS system. Front-panel input LEDs indicate primary or secondary power availability.
Digital Current Meter Assure proper load balance with the PDUMH20AT's easy to read, two-character digital LED meter that displays the total connected equipment load. This meter enables IT personnel to monitor the total load on the PDU in real time, allowing more equipment to be safely connected with no danger of overloading the PDU or power supply circuits. Plus, the outlets are factory programmed for sequential turn-on when the PDU is first powered on to prevent inrush-related equipment interaction on start-up and safeguard against costly overloads.
Optional Advanced Power Management A built-in SNMPWEBCARD slot enables the PDUMH20AT to be permanently upgraded to a switched PDU with full network power monitoring and individual outlet control capability. With an SNMPWEBCARD (sold separately) installed, the PDUMH20AT can also be custom programmed for power-on and power-off sequences with user-specified time delays in response to loss and restoration of primary input power.
Versatile Installation Options The PDUMH20AT is easy to integrate with a wide range of data center and network applications. It is suitable for 1U installation in standard 19-inch rack enclosures as well as wall-mount, workbench, under-counter and similar installations. Two included L5-20R to 5-20P plug adapters enable the PDU to be connected to standard 5-15/20R outlets.
Switchless Design The PDUMH20AT's switchless design prevents accidental shutoff and safeguards against downtime due to human error. The L5-20P plug locks into place to maintain a secure connection.
Peace of Mind The PDUMH20AT comes with a 2-year warranty.
What’s in the Box
PDUMH20AT Metered PDU with ATS
Detachable C19 to L5-20P Power Cord (12 ft./3.6 m)
APC offers power cord (also known as jumper cord), which
provide connector options to fulfill a variety of power requirements. Use these power cords to connect your equipment to an APC Rack Mount power distribution unit (PDU)/outlet strip, MasterSwitch ...
The HP Power Distribution Unit (PDU) with Power Monitoring is
a family of power distribution products. The HP PDU with Power Monitoring enables data centers to provide full rack power from a single power distribution unit.
PDUMH15Click Here for the Tripp Lite Store Product DescriptionView largerTripp Lite's
PDUMH15 Metered PDU is ideal for distributing and monitoring power from a UPS system, generator or utility wall outlet in high density IT environments. It provides 13 outlets (1 ...