With a 5000VA/3750W capacity in only three rack spaces (3U), the SMART5000TEL3U offers complete protection for rackmount equipment and is one of the smallest 5kVA models available. Its advanced automatic voltage regulation provides regulated output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts, and runtime is expandable with optional external battery packs. A hot-swappable internal power module and internal battery modules enable UPS maintenance to be performed without interrupting power to the connected load. Included PowerAlert UPS monitoring and unattended shutdown software provides management support for an unlimited number of network UPS systems.
Tripp Lite's SMART5000TEL3U SmartPro® UPS System:
Advanced line-interactive operation
5000VA/3750W capacity with 208V output supports high-voltage equipment
Ideal for Protection of Data Center/Network Rackmount Equipment The SMART5000TEL3U provides a high 5000VA/3750W capacity, advanced automatic voltage regulation, reliable battery backup and comprehensive power management capability in just 3U of rack space. Featuring five outlets (2 x 5-15R, 2 x L6-20R, 1 x L6-30R), USB/DB9 ports and an SNMP accessory slot, the SMART5000TEL3U offers a complete solution for protection of servers, storage devices and telecom equipment. Two outlets provide 120V output for monitors, VoIP systems and other low-power networking applications.
Advanced Automatic Voltage Regulation (AVR) Advanced AVR protects connected equipment from incremental hardware damage, data loss and performance problems that can be caused by brownouts (low-voltage conditions) and overvoltages. The SMART5000TEL3U corrects brownouts as low as 174V and overvoltages as high as 282V to a nominal 208V.
Hot-Swap Capability Featuring removable internal power modules, the SMART5000TEL3U provides hot-swap capability that eliminates downtime if a repair or battery replacement is needed. The unit is easily hot-swappable by a user of any skill set—no need for lengthy and expensive service calls. When the power module is removed, the UPS automatically switches to bypass mode, supplying connected equipment with unfiltered power. The SMART5000TEL3U's internal battery modules can also be removed and replaced without powering down the UPS or interrupting power to connected equipment.
Reliable Battery Backup The SMART5000TEL3U features a large internal battery that provides 8.5 minutes of battery support for a full load (3750 watts) and 20 minutes for a half load (1875 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed.
Highly Efficient Operation Reduces BTU Output The SMART5000TEL3U features high-efficiency operation—up to 95%—that can significantly reduce a facility's energy costs by minimizing heat output, lowering cooling requirements and reducing the consumption of electricity.
AC Line Surge Suppression and EMI/RFI Line Noise Filtering The SMART5000TEL3U features a 1020-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. Additionally, incorporated technology filters out disruptive line noise, preventing it from affecting your equipment.
USB/DB9 Ports, SNMP Capability and Included PowerAlert Software The SMART5000TEL3U features two HID-enabled USB ports and two DB9 ports (cables included). Used with Tripp Lite's included PowerAlert software these communication ports provide comprehensive network power monitoring and control. The SMART5000TEL3U also accepts an optional SNMPWEBCARD accessory (sold separately) that enables the UPS to operate as a managed device on the network.
Ideal in rackmount or tower installations for centralized UPS protection of critical 208V equipment in server rooms, internetworking closets and telecommunications systems. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems
Switches: Includes 2 front panel mounted push button switches for system enable, self-test and alarm cancel functions
Smart Pro 5000TEL3U UPS
SMART5000TEL3U UPS System
PowerAlert Software and cabling
Certifications & Standards
UL1778 (USA), CSA (Canada), FCC Class A (Emissions)
5.25" Height x 17.50" Width x 25" Depth
3U Tower/Rack Mountable
110 V AC
-6 to +20% Output
208 V AC Nominal
24 A Maximum Input Current
EMI / RFI
5 kVA/3.75 kW
Input Voltage Range
208 V AC
1 x NEMA L6-30R
2 x NEMA L6-20R
2 x NEMA 5-15R
View all buying options for Tripp Lite SMART5000TEL3U Smart 5000VA UPS 3U Rackmount Line-Interactive 5kVA 5 Outlet