Tripp Lite SmartOnline .75kVA On-Line Double-Conversion UPS

CONSUMER ELECTRONICS

AUDIO & VIDEO COMPONENTS

POWER PROTECTION

UPS

SU750RTXLCD2U

Click Here for the Tripp Lite Store

Product Description

Leaving your equipment unprotected risks the possibility of damage and data loss due to power outages, voltage fluctuations and transient surges. Delivering a 750VA/675W capacity in only two standard rack spaces (2U), Tripp Lite's SU750RTXLCD2U SmartOnline™ UPS System protects connected equipment against data loss, downtime and equipment damage due to these common power problems. Featuring true on-line operation with pure sine wave output and zero transfer time to battery, it provides the highest level of power protection for mission-critical equipment. Internal batteries support connected equipment during blackouts, and runtime is expandable with optional external battery packs. The SU750RTXLCD2U comes with a 2-year warranty and $250,000 of Ultimate Lifetime Insurance for connected equipment.

SU750RTXLCD2U SmartOnline™ UPS System:

True on-line operation with pure sine wave output and zero transfer time to battery
750VA/675W capacity with superior 0.9 power factor supports more equipment
Six AC outlets (two individually controllable)
Intuitive LCD interface
Communication ports and included PowerAlert software
$250,000 Ultimate Lifetime Insurance and a 2-year warranty

View larger

Included PowerAlert Software

View larger

Ideal for Protection of Mission-Critical Rackmount Equipment
The SU750RTXLCD2U provides true on-line operation, reliable battery backup and comprehensive power management capability in just 2U of rack space. Featuring six outlets, USB/DB9 ports and a slot for an optional SNMPWEBCARD (sold separately), the SU750RTXLCD2U offers a complete power protection solution for servers, storage devices, telecom systems and other mission-critical applications.

True On-Line Operation
The SU750RTXLCD2U provides the highest level of protection available for mission-critical equipment. It actively converts raw incoming AC power to DC and then re-converts it back to regulated, filtered AC output with a pure sine wave, completely isolating connected components from all power problems.

Reliable, Expandable Battery Backup
The SU750RTXLCD2U's internal battery set provides nine minutes of battery support for a half load (337.5 watts) and three minutes for a full load (675 watts). For mission-critical applications demanding continuous uptime, the fully scalable SU750RTXLCD2U can provide expandable runtime with optional external battery packs, sold separately (Tripp Lite BP24V15RT2U, BP24V28-2U and BP24V70-3U).

Highly Efficient Operation Reduces BTU Output and Energy Costs
The SU750RTXLCD2U features an optional, highly efficient economy mode setting that can significantly reduce a facility's energy costs. In economy mode, the UPS operates with 93% efficiency, minimizing heat output, reducing cooling requirements and consuming less electricity. In standard operation, the SU750RTXLCD2U's high 0.9 power factor enables it to support more equipment.

LCD Status Display and Audible Alarm
The SU750RTXLCD2U features a combination front panel LED and LCD display that allows IT personnel to monitor the unit's operating mode and pertinent data such as load percentages, power factor, input and output volts, battery charge and estimated runtimes. An audible alarm sounds in case of power-failure, low-battery, overload and fault conditions.

USB/DB9 Ports, SNMP Capability and Included PowerAlert Software
The SU750RTXLCD2U features a USB port, a DB9 port and an EPO (Emergency Power Off) port (cables included). Used with Tripp Lite's included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. The SU750RTXLCD2U also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed device via the SNMP network.

Individually Controllable Outlets
The SU750RTXLCD2U includes two AC outlets that are individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment.

Tel/Ethernet Surge Suppression and Line Noise Filtering
The SU750RTXLCD2U features one set of tel/Ethernet (RJ45) jacks that provide surge protection for a standard phone or network connection (cable not included). Its 570-joule surge suppression rating protects connected components and data from the harmful effects of power surges. By providing regulated, filtered, pure sine wave AC output, the SU750RTXLCD2U also completely isolates connected equipment from disruptive line noise.

Versatile Installation Options
The SU750RT

What’s in the Box

What’s in the Box

SU750RTXLCD2U UPS System
PowerAlert Software with USB, Serial & EPO cabling
4-Post Rackmount Installation Kit
Instruction Manual

SmartOnline™ LCD UPS Systems	SU750RTXLCD2U	SU1000RTXLCD2U
Rack Space	2U	2U
VA/Watts	750/675	1000/900
Outlets/Communication Ports	6 (5-15R)/USB; DB9	6 (5-15R)/USB; DB9
Half-Load Runtime	9 min.	14 min.
Expandable Runtime with Battery Pack(s)	BP24V15RT2U BP24V28-2U BP24V70-3U	BP24V15RT2U BP24V28-2U BP24V70-3U
Warranty	2-year	2-year

Features

	750VA / .75kVA / 675W on-line double-conversion 2U rack / tower UPS
	100/110/120/127V 50/60Hz output; High efficiency economy mode option
	Interactive LCD with 9 selectable screens of UPS and site power data
	Expandable runtime, Hot-swap batteries, 12.5 in / 31.8 cm depth
	USB, RS232 & EPO ports, support for SNMP/WEB card option
	2 independently switched load banks
	NEMA 5-15P input; 6 NEMA 5-15R outlets
	What's in the Box
	SU750RTXLCD2U UPS System
	PowerAlert Software with USB, Serial & EPO cabling
	4 post rackmount installation kit
	Instruction manual

Tech Specs

	OUTPUT
	Output Volt Amp Capacity (VA): 750
	Output kVA capacity (kVA): .75
	Output Watt Capacity (watts): 675
	Output power factor: 0.9
	Output Capacity Details:
	ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120/115/110V 675 watts, 100V 608 watts). FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120/115/110V 472 watts / 100V 425 watts).
	Crest Factor: 3:1
	Nominal Output Voltage(s) Supported: 100V; 110V; 115V; 120V; 127V
	Nominal Voltage details: 120V factory-default nominal voltage
	Frequency compatibility: 50/60 Hz (auto-selectable); Supports 50 to 60 Hz and 60 to 50 Hz conversion
	Frequency compatibility details:
	ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz.
	Output voltage regulation (line mode) : +/- 2%
	Output voltage regulation (Economy line mode) : +/- 10%
	Output voltage regulation (Battery mode) : +/- 3%
	Built-in UPS output receptacles: 6 5-15R outlet(s)
	Built-in controllable switched load banks: Two switchable single-outlet 5-15R load banks
	Output AC waveform: Pure Sine wave
	INPUT
	Rated input current (at maximum load): 8A
	Nominal Input Voltage(s) Supported: 100V AC; 110V AC; 115V AC; 120V AC; 127V AC
	Nominal input voltage description: 120V factory default
	UPS input connection type: 5-15P
	Input circuit breaker: 15A
	UPS Input cord length (ft.) : 10
	UPS Input cord length (m) : 3
	Recommended Electrical Service: 15A 120V
	BATTERY
	Full load runtime (minutes) : 3 min. (675w)
	Half load runtime (minutes) : 9 min. (337.5w)
	Expandable battery runtime: Extended runtime supported via optional external battery packs
	External battery pack compatibility: BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible)
	Expandable runtime description: Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for details
	DC system voltage (VDC) : 24
	Battery recharge rate (included batteries) : Less than 3 hours recharge to 90%
	Replacement battery cartridge (internal UPS battery replacement) : RBC24V-LCD
	Battery Access: Front panel battery access
	Battery replacement description: Hot-swappable, user replaceable batteries
	VOLTAGE REGULATION
	Voltage regulation description: Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages
	Overvoltage correction: Corrects overvoltages to 150V (0-100% load)
	Undervoltage correction: Corrects undervoltages to 100V at full load (90V at 100V nominal)
	Severe undervoltage correction: Corrects brownouts to 70V (70% load) & 55V (33% load)
	LEDS ALARMS & SWITCHES
	LED Indicators: 7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status
	Front panel LCD display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options
	Alarms: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
	Alarm cancel operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
	Switches: 2 switches control off/on power status and alarm-cancel operation; 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options
	SURGE / NOISE SUPPRESSION
	UPS AC suppression joule rating: 570
	UPS AC suppression response time: Instantaneous
	UPS Dataline suppression: 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
	EMI / RFI AC noise suppression: Yes
	PHYSICAL
	Installation form factors supported with included accessories: 4 post 19 inch rackmount (mounting rail kit included)
	Installation form factors supported with optional accessories: 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
	Primary form factor: Rackmount
	UPS / Power Module dimensions in primary form factor (height x width x depth / inches) : 3.5 x 17.5 x 12.5
	UPS / Power Module dimensions in primary form factor (height x width x depth / cm) : 8.9 x 44.4 x 31.8
	Installed whole system total rack space height (rack spaces) : 2U
	Secondary form factor: Tower (requires 2-9USTAND)
	UPS / Power Module weight (lbs) : 27.6
	UPS housing material: Steel
	Cooling method: Fan
	ENVIRONMENTAL
	Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
	Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
	Relative Humidity: 0 to 95%, non-condensing
	AC mode BTU / hr. (full load) : 341
	AC economy mode BTU / hr. (full load) : 230
	Battery mode BTU / hr. (full load) : 585
	AC economy mode efficiency rating (100% load) : 93%
	Operating Elevation (ft) : 0-3000m / 0-10,000 ft.
	Audible Noise: 45 dBA at 1m front side
	COMMUNICATIONS
	Communications interface: USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
	Network monitoring port description: Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications
	PowerAlert software: Included
	Communications cable: USB and DB9 cabling included
	WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
	LINE / BATTERY TRANSFER
	Transfer time: Zero (0 milliseconds) in double-conversion mode; 4 milliseconds economy mode
	Low voltage transfer to battery power (setpoint) : 100V at full load (90V full load at 100V nominal setting); 70V at 70% load; 55V at 33% load
	High voltage transfer to battery power (setpoint) : 150
	SPECIAL FEATURES
	Cold Start (startup in battery mode during a power failure) : Cold-start operation supported
	High availability UPS features: Automatic inverter bypass; Hot swappable batteries
	Green & high efficiency features: High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy mode operation
	CERTIFICATIONS
	UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category B (EMI); ROHS (Restriction of Hazardous Substances)
	WARRANTY
	Product Warranty Period (Worldwide) : 2-year limited warranty
	Connected Equipment Insurance (U.S., Canada & Puerto Rico) : $250,000 Ultimate Lifetime Insurance

BloomReach Content

Tripp Lite SmartOnline .75kVA On-Line Double-Conversion UPS - 2U Rack/Tower, Interactive LCD display, 100/110/120/127V NEMA outletsShow More + - SU750RTXLCD2U

Product Details:

Rakuten