Optimized for Data Center Applications
The SR42UBSD is optimized for data center and other high-density IT applications. Its massive front-to-rear ventilation capacity meets or exceeds server manufacturer requirements. The SR42UBSD offers full compatibility with a wide range of airflow optimization accessories as well as cable management accessories. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. The SR42UBSD offers guaranteed compatibility with all EIA-310-E compliant 19-in. equipment, and is also 100% compatible with today's state-of-the-art hot-aisle/cold-aisle data center configurations.
With a 32-in. depth, the SR42UBSD is shallower than a standard enclosure, making it a great solution for cramped wiring closets, server rooms and other limited-space applications. Combined with a standard 24-in. width, the SR42UBSD's shallow-depth form factor optimizes space usage and allows for high-density A/V equipment and other smaller equipment to be installed in areas with limited floor space.
Secure Equipment Access
The SR42UBSD is designed to provide a safe, secure installation solution for mission-critical rackmount equipment. It uses locking, reversible and removable front and rear perforated doors to promote efficient airflow. The easily removable half-size side panels (two per side) are also locking and removable to prevent unauthorized access, while still allowing IT personnel to easily perform inspections, maintenance and equipment replacement. A split rear door design reduces clearance requirements for service access so that the enclosure can be placed closer to a wall.
Simple Equipment Installation
The SR42UBSD is compatible with all standard 19-inch rack equipment. Its front and rear pairs of vertical rails with square mounting holes are adjustable in quarter-inch increments to accommodate equipment depths from 4 to 27 inches. Adjustment is quick and convenient—simply unscrew the rails, slide them to the desired depth and restore the screws. An easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. The rails are capable of supporting up to 3000 lbs of equipment with included installation hardware. Each rack space within the enclosure is numbered for ready reference.
Toolless Vertical Mounting Rails
The SR42UBSD's two adjustable vertical mounting rails support toolless button-mount 0U installation of compatible PDUs and cable managers. Each rail can accommodate two vertical PDUs or cable managers side by side, for a total of four units per enclosure. These vertical mounting rails make it easier to route power and cabling to installed rack equipment. They also reduce cord and cable clutter that could block airflow through the enclosure.
Vented Top Panel with Cable Ports
The top panel of the SR42UBSD is furnished with vents designed to help remove warm air from the enclosure and draw in cool air by convection. It also supports installation of standard user-supplied case fans. The top panel provides ports for cable routing, and is designed for quick, toolless removal with no need to disconnect cables. The SR42UBSD is designed with an open bottom to facilitate cable access.
Integral Grounding System
All components of the SR42UBSD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.
Preinstalled Casters and Leveling Feet
To simplify deployment, the SR42UBSD comes with preinstalled casters meant for minor position adjustments as well as leveling feet to stabilize the rack once positioned. The casters enable the SR42UBSD to be easily maneuvered into the desired location within the final installation area, where it can then be secured in place by adjusting the levelers. The SR42UBSD has a rolling load capacity of 2250 lbs to allow rack equipment to be installed in the enclosure prior to final deployment.
5-Year Product Warranty, PCI Compliance and Environmentally Responsible Design
The SR42UBSD comes with a 5-year product warranty and a rapid-response repair/replacement policy that's unmatched in the industry. This rack also meets enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance. As part of Tripp Lite's commitment to environmental responsibility, the SR42UBSD is manufactured in compliance with strict RoHS specifications.
Rack spaces: 42
Load capacity (rolling): 2250 lbs
Load capacity (stationary): 3,000 lbs
Mounting depth: 4 to 27 in.
Mounting holes: Square (mounting hardware included)
Doors: Front; rear (lockable/reversible/perforated)
Side panels: 2 per side (lockable/removable/perforated)
Top panel: Vented/removable
Cable ports: Top panel (removable covers)
Height: 78.5 in.
Width: 23.63 in.
Depth: 32.48 in.
Weight: 261 lbs
Material of construction: Steel
Warranty: 5 years