Tripp Lite SU1000RTXL2UA Smart Online 1000VA UPS 2U Rackmount 6 Outlets Extended Runtime

Product Description

View larger

View larger

View larger

Ideal for Protection of Mission-Critical Rackmount Equipment
The SU1000RTXL2UA provides a high 1000VA/800W capacity, true on-line operation, reliable battery backup and comprehensive power management capability in just 2U of rack space. Featuring six outlets, USB/DB9 ports and a slot for an optional SNMPWEBCARD, the SU1000RTXL2UA offers a complete power protection solution for servers, storage devices, telecom systems and other mission-critical applications.

True On-Line Operation
The SU1000RTXL2UA provides the highest level of protection available for mission-critical equipment. It actively converts raw incoming AC power to DC, then re-converts it back to regulated, filtered AC output with a pure sine wave, completely isolating connected components from all power problems.

Reliable, Expandable Battery Backup
UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SU1000RTXL2UA's internal battery set provides 4.5 min. of battery support for a full load (800 watts) and 14 min. for a half load (400 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed.

Highly Efficient Operation Reduces BTU Output
The SU1000RTXL2UA features an optional, highly efficient economy mode setting that can significantly reduce a facility's energy costs. In economy mode, the UPS operates with 94% efficiency, minimizing heat output, reducing cooling requirements and consuming less electricity.

LED Status Display and Audible Alarm
The SU1000RTXL2UA features a front-panel, 14-LED display that enables IT personnel to monitor line power, on-line mode, bypass mode, on-battery, overload, battery low, replace battery and fault status information. The LED panel rotates for viewing in horizontal rack or vertical tower installations. The LEDs are supplemented by an audible alarm that signals various UPS conditions.

USB/DB9 Ports, SNMP Capability and Included PowerAlert Software
The SU1000RTXL2UA features a USB port and a DB9 port. Used with Tripp Lite's included PowerAlert software these communication ports provide comprehensive network power monitoring and control. The SU1000RTXL2UA also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed device via the SNMP network.

Individually Controllable Outlets
The SU1000RTXL2UA includes two AC outlets that are individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment.

What’s in the Box

• SU1000RTXL2UA UPS System
• PowerAlert Software CD
• 1 x 6-ft. USB Cable
• 1 x 6-ft. DB9 Cable
• 4-Post Rackmounting Hardware
• Instruction Manual