Ideal for Protection of Mission-Critical Rackmount Equipment
The SU2200RTXLCD2U provides true on-line operation, reliable battery backup and comprehensive power management capability in just 2U of rack space. Featuring six outlets, a 2200VA/1800W load capacity, USB/DB9 ports and a slot for an optional SNMPWEBCARD, the SU2200RTXLCD2U offers a complete power protection solution for servers, storage devices, telecom systems and other mission-critical applications.
True On-Line Operation
The SU2200RTXLCD2U provides the highest level of protection available for mission-critical equipment. It actively converts raw incoming AC power to DC and then re-converts it back to regulated, filtered AC output with a pure sine wave, completely isolating connected components from all power problems.
Reliable, Expandable Battery Backup
The SU2200RTXLCD2U's internal battery set provides 4 minutes of battery support for a full load (1800 watts) and 12 min. for a half-load (900 watts). For mission-critical applications demanding continuous uptime, the fully scalable SU2200RTXLCD2U can provide expandable runtime with optional external battery packs, sold separately (Tripp Lite BP48V24-2U and BP48V60RT-3U).
Highly Efficient Operation Reduces BTU Output and Energy Costs
The SU2200RTXLCD2U features an optional, highly efficient economy mode setting that can significantly reduce a facility's energy costs. In economy mode, the UPS operates with 94% efficiency, minimizing heat output, reducing cooling requirements and consuming less electricity.
LCD Status Display and Audible Alarm
The SU2200RTXLCD2U features a combination front panel LED and LCD screen that allows IT personnel to monitor the unit's operating mode and pertinent data such as load percentages, power factor, input and output volts, battery charge and estimated runtimes. An audible alarm sounds in case of power-failure, low-battery, overload and fault conditions.
USB/DB9 Ports, SNMP Capability and Included PowerAlert Software
The SU2200RTXLCD2U features a USB port and a DB9 port (cables included). Used with Tripp Lite's included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. The SU2200RTXLCD2U also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed device via the SNMP network.
Individually Controllable Outlet Banks
The SU2200RTXLCD2U's outlets are arranged in two load banks, with three outlets per bank. These load banks are individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment.
Line Noise Filtering & Tel/Ethernet Surge Suppression
The SU2200RTXLCD2U features one set of tel/Ethernet (RJ45) jacks that provide surge protection for a standard phone or network connection (cable not included). Its 570-joule surge suppression rating protects connected components and data from the harmful effects of power surges.