Ideal for Protection of Mission-Critical Rackmount Equipment
The SU3000RTXL2U provides true on-line operation, reliable battery backup and comprehensive power management capability in just 2U of rack space. Featuring a 3000VA/2500W capacity, .83 power factor, 7 outlets (6 x 5-15/20R, 1 x L5-30R), USB/DB9 ports and a slot for an optional SNMPWEBCARD, the SU3000RTXL2U is a complete power protection solution for servers, storage devices, telecom systems and other mission-critical applications.
True On-Line Operation
The SU3000RTXL2U provides the highest level of protection available for mission-critical equipment. It actively converts raw incoming AC power to DC, then re-converts it back to regulated, filtered AC output with a pure sine wave, completely isolating connected components from all power problems.
Reliable, Expandable Battery Backup
UPS battery backup keeps connected equipment operational through short power failures, and gives users time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SU3000RTXL2U's internal battery set provides 15 min. of battery support for a half load (1250 watts) and 6 min. for a full load (2500 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed. For mission-critical applications demanding continuous uptime, the fully scalable SU3000RTXL2U can provide expandable runtime with optional external battery packs (Tripp Lite BP72V15-2U; BP72V28RT-3U; BP72V18-2US), sold separately.
Highly Efficient Operation Reduces BTU Output
The SU3000RTXL2U features an optional, highly efficient economy mode setting and .83 power factor that can significantly reduce a facility's energy costs. In economy mode, the UPS operates with 97% efficiency, minimizing heat output, reducing cooling requirements and consuming less electricity.
LED Status Display and Audible Alarm
The SU3000RTXL2U's front-panel, 14-LED display that allows IT personnel to monitor line power, on-line mode, bypass mode, on-battery, overload, battery low, replace battery and fault status information. The LED panel rotates for viewing in horizontal rack or vertical tower installations. The LEDs are supplemented by an audible alarm that signals UPS startup, power failure, low battery, overload, UPS fault and remote shutdown conditions.
USB/DB9 Ports, SNMP Capability and Included PowerAlert Software
The SU3000RTXL2U features a USB port and a DB9 port (cables included). Used with Tripp Lite's included PowerAlert software these communication ports provide comprehensive network power monitoring and control. Capabilities include UPS and line power status messaging (on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity) timed inverter shutoff after unattended shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SU3000RTXL2U also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed device via the SNMP network.
Individually Controllable Load Banks
The SU3000RTXL2U includes 2 load banks comprised of 3 outlets that are individually controllable via the software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment.
EMI/RFI Line Noise Filtering
Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware damage, data corruption and performance problems. By providing regulated, filtered, pure sine wave AC output, the SU3000RTXL2U completely isolates connected equipment from disruptive line noise.
Versatile Installation Options
The SU3000RTXL2U requires only 2U of rack space in a standard 4-post rack enclosure (mounting accessories included). It can also be installed in a 2-post rack using the optional 2POSTRMKITWM accessory, or in an upright tower configuration with the optional 2-9USTAND accessory.
2-year Warranty and Environmentally Responsible Design
The SU3000RTXL2U comes backed by a 2-year warranty and $250,000 of Ultimate Lifetime Insurance. As part of Tripp Lite's commitment to environmental responsibility, it is manufactured in compliance with strict RoHS specifications.
Voltage compatibility: 120V AC
Frequency compatibility: 50/60 Hz
VA/Wattage Capacity: 3000/2500
Battery runtimes (half/full): 15 min. (1250W)/6 min. (2500W) (expandable)
Outlet quantity/type: 6 x 5-15/20R, 1 x L5-30R; (2 individually controllable load banks)
Signal line protection: RJ45 tel/Ethernet jacks (1 set)
Communications ports: 1 x USB; 1 x DB9; SNMP slot
Input cord: 10 ft.
Input plug: L5-30P
Switches/LEDs/alarms: On/Off switch; Alarm cancel/self-test switch; 14 LEDs; Audible alarm
Cooling method: Fan
Dimensions (HWD): 3.5 x 17.3 x 26 in. (2U RM)
Weight: 68.8 lbs.
Material of construction: Steel
Regulatory Compliance: Meets UL 1778, CSA (Canada), NOM (Mexico), FCC Part 15 Category A (EMI) and RoHS standards
Warranty/Ultimate Lifetime Insurance: 2-year/$250,000