Tripp Lite SmartOnline SU8000RT4U 8000VA Tower/Rack Mountable UPS

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Tripp Lite 8kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS offers 8000VA on-line, double-conversion UPS support for server, network and telecommunications equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions. Single all-in-one housing installs in 4 rack spaces (4U). Upright tower and two post rackmount installation supported with optional accessories. Maintains full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects brownouts and overvoltages from 65V to 140V (L-N). Expandable runtime with optional external battery packs. Converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Network-grade AC surge and noise suppression. Network management interfaces include combination DB9 RS-232 enabled and dry contact serial port, enhanced USB port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Supports Emergency Power Off (EPO) via built-in interface. Front panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Split phase 4 conductor hardwire input. UPS supported outlets include two L6-30R, two L6-20R and 4 low voltage 5-15/20R. Hardwire output is also supported. Hardwire connections and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment. Internal batteries and optional external battery packs are field replaceable and hot swappable. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Features

	True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise


	8000VA / 5600 watt output power capacity with dual voltage output of 208/120 or 240/120V


	4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces


	Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types


	Hardwire input / output connections and output receptacles are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment


	Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment


	Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages


	Supports connected equipment during blackouts for 12/5 minutes at half/full load levels, runtime is further expandable with optional external BP192V12-3U battery packs


	Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot. DB9 port supports RS-232 and dry contact messaging. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.


	Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP


	Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control


	Built-in Emergency Power Off (EPO) interface with cable


	Includes hardwire output and 8 output receptacles (2 L6-30R, 2 L6-20R, 4 NEMA 5-15/20R), all of which are available for simultaneous use


	Split phase, 4 conductor hardwire connection (featured on included detachable PDU).


	Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions


	Front panel switches enable power on/off control, self-test and alarm cancel functions


	Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures


	Optional 2-9USTAND set of tower stands supports upright tower installation


	Optional 2POSTRMKITWM accessory enables 2 post rackmount installation


	Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service


	2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Tech Specs

	COMPLETE SPECIFICATIONS


	SYSTEM OVERVIEW
	System overview: 8kVA / 8000VA online, double conversion UPS with detachable PDU backplate
	Voltage compatibility: 208/120 or 240/120V split phase, 4 wire
	Frequency compatibility: 60Hz
	OUTPUT
	Output volt amp capacity (VA): 8000 (240v) / 7200 (208v)
	Output watt capacity (watts): 5600
	Output nominal voltage: 208/120 or 240/120V
	Output voltage regulation: Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 5% total harmonic distortion
	Output frequency regulation: Regulates line frequency to 60Hz +/- 0.05Hz
	Outlet quantity / type: Hardwire, plus 2 L6-30R, 2 L6-20R and 4 5-15/20R
	Overload protection: Circuit breaker protection on detachable PDU backplate
	INPUT
	Maximum input amps: 34A
	Input connection type: Hardwire
	BATTERY
	Full load runtime: 5 minutes (5600 watts) - expandable
	Half load runtime: 12 minutes (2800 watts) - expandable
	Expandable battery runtime: Yes, with optional BP192V12-3U
	DC system voltage: 192V
	Typical battery lifespan: 4-6 years (typical)
	Battery recharge rate: 6 hour recharge to 80%
	Replacement Battery Cartridge: RBC9-192
	VOLTAGE REGULATION
	Voltage regulation description: Maintains 208/120 or 240/120V output +/-2%
	Overvoltage correction: Corrects overvoltages as high as 140V (L1-N:L2-N)
	Brownout correction: Corrects brownouts as low as 65V (L1-N:L2-N)
	LEDS ALARMS & SWITCHES
	Front panel LEDs: 6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation. SELECTABLE LCD DISPLAY: input/output voltage, Hz, battery voltage and charge level and detailed warnings regarding all major UPS functions.
	Alarms: Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete
	Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting output power
	SURGE / NOISE SUPPRESSION
	AC surge suppression: Network grade surge suppression conforms to IEEE 587 / ANSI C62.41 specifications
	AC suppression response time: Instantaneous
	EMI / RFI AC noise suppression: Yes
	PHYSICAL
	Shipping weight (lbs): 212
	Shipping weight (kg): 96.2
	Unit weight (lbs): 177
	Unit weight (kg): 80.4
	Unit Dimensions (HWD/in): 7 x 17.5 x 32.55
	Unit Dimensions (HWD/cm): 17.8 x 44.5 x 82.7
	Shipping Dimensions (HWD/in): 13 x 23 x 37
	Shipping Dimensions (HWD/cm): 33 x 58.4 x 94
	Material of construction: steel
	Form factors supported: Rack (4u)
	Cooling method: fan
	Battery Access: User replaceable, hot swappable internal batteries and external battery packs
	ENVIRONMENTAL
	Operating Temperature: +32 to +104 degrees Fahrenheit, 0 to +40 degrees Celsius
	Storage Temperature: +5 to +122 degrees Fahrenheit, -15 to +50 degrees Celsius
	Relative Humidity: 0 to 95%, non-condensing
	Operating Elevation (ft): 0-3000m (0 to 10,000 ft.)
	Audible Noise: 60 dBA at front side 1 meter
	COMMUNICATIONS
	Network monitoring port: Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring. HID-compliant USB interface enables integration with built-in power management and auto shutdown features
	Software and cabling included: Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling included.
	SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
	LINE / BATTERY TRANSFER
	Transfer time from line power to battery mode: Zero, on-line UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
	Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 65V (L1-N:L2-N). Below this point, output is maintained utilizing battery reserves.
	High voltage transfer to battery power: Maintains continuous operation during overvoltages to 140V (L1-N:L2-N). Above this point, output is maintained utilizing battery reserves.
	CERTIFICATIONS
	Certifications: Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), Class A (Emissions), NOM (Mexico)
	WARRANTY
	Product warranty: 2 year product warranty
	Connected equipment insurance (USA and Canada Only): $250,000 connected equipment insurance (USA, Puerto Rico and Canada only)
	Optional coverage: 3 year, 5 year, next day and on-site warranty coverage available
	SPECIAL FEATURES
	EPO port: Includes dedicated EPO (emergency power off) interface and cabling
	Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
	Appearance: Attractive black steel rackmount housing
	BATTERY PACK ACCESSORY (optional)
	Battery Pack Accessory (optional): BP192V12-3U

BloomReach Content

Tripp-Lite SU8000RT4U Smart Online 8000VA UPS 4U Rackmount Hot Swap 8 Outlets 208-240V 8kVA - On-line, double-conversion protection for mission critical applications

Product Details:

Rakuten