Be the first to review this item and earn 25 Rakuten Super Points™
ACCULINK 3172 is a intelligent, full-featured E1 CSU/DSU multiplexer product providing an interface between customer-premise equipment such as routers, front-end processors, video servers and digital PBXs, and the E1 network. The 3172 provides the capability to support fast, efficient, distributed applications, including remote file sharing, telecollaboration, and white boarding in a most cost-effective manner.
Comprehensive, integrated management is an extra plus for the 3172 CSU/DSU. Its designed-in flexibility lets you comprehensively configure, troubleshoot, and monitor its functions using an integrated front panel, PC-based front panel emulation software, SNMP browsing techniques, and ASCII terminal interface. The choice is yours!
2 x BNC Network / 1 x 8-pin RJ-48C Network / 2 x 15-pin DB-15 / 1 x 8-pin COM / 1 x 8-pin Auxiliary / 2 x 25-pin DB-25
5 to 95% Non-condensing Relative Humidity
32°F (0°C) to 122°F (50°C) Operating / 32°F (0°C) to 158°F (70°C) Storage
Manufacturer Part Number
Manufacturer Website Address
ACCULINK 3172 E1 CSU/DSU
Data Transfer Rate
64 Kbps to 2.05 Mbps
Framing Format: G.732 Comprehensive voice, data, and video multiplexing support Six test jacks Drop & Insert Capability: Compatible with the signal format of ITU-T Recommendation G.703 and the Frame Structure of ITU-T Recommendation G.704 Clocking : Internal: 2.048 MHz (+/- 50 PPM accuracy) External: Network E1, G.703, Port One Link Layer Protocols Supported: Point-to-Point (PPP) Serial Line Internet Protocol (SLIP)
Certifications & Standards
CSA-22.2 No. 950-M89 CSA 108-M1983 FCC Part 15 UL 1950
3.90" Height x 7.63" Width x 12.13" Depth
110 V AC
SNMP Browsing: Your Network Management System (NMS) can optionally link to the 317X, exchanging SNMP MIB traps, alarms, configurations, etc., via a breadth of schemes, including: PPP/SLIP router connection E1 in-band External modem 317X-to-317X daisy chaining MIBs Supported: MIB II DS1/E1 MIB RS232-like MIB Generic-Interface MIB
HDB3 / AMI
TESTS: Local: Payload Loopback (PLB) Line Loopback (LLB) DTE Loopback (DLB) Repeater Loopback (RLB) Data Channel Loopback (DCLB) Data Terminal Loopback (DTLB) Lamp (tests the front panel LEDs) Remote: Data channel loopback up (DCLBUP) activation sequence to initiate a V.54 Loop 2 Data channel loopback down (DCLBDN) activation sequence to terminate a V.54 Loop 2 Patterns: 1-in-8: 511 (selectable data ports) QRSS (selectable DS0s) (Quasi- Random Signal Source)
75 Ohm / 120 Ohm
Point-to-Point / Multipoint
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
5% Back* Sitewide with Promo Code Rewardme
*See page for details