Be the first to review this item and earn 25 Rakuten Super Points™
COMSPHERE 3610 Data Service Unit is highly reliable, state-of-the-art product ideal for today's network-managed digital environments and also TDM/MCMP option is supported by the COMSPHERE 3610. The COMSPHERE 3610 provides 'Flex' function which allows each port to be configured as either RS232 or V.35 electrical.
TXD/103 - Transmit data RXD/104 - Receive data RTS/105 - Request-to-send CTS/106 - Clear-to-send DSR/107 - Data set ready DTR/108 - Data terminal ready LSD/109 - Line signal detect OK Alarm Test Dail SDCP Select Back Up 16-character LCD on the front panel displays
1 x 8-pin RJ-48S Network / 1 x 25-pin DB-25 DTE / 1 x 34-pin M/34 V.35 / 5 x 25-pin DB-25
5 to 90% Non-condensing Relative Humidity
32°F (0°C) to 122°F (50°C) Operating / -4°F (-20°C) to 158°F (70°C) Storage
Three power levels for compatibility with RBOC and local exchange carrier fixed data rates of 19,200 bps Elastic store feature for extented circuit applications Asynchronous or Synchronous support on all ports Timing: DDS, internal, external or receiver Transmit Levels: 19,200 bps: -10, 0, or +6 dBm 9,600 bps: 0 dBm All other speeds: +6 dBm Receiver Sensitivity Level: -42 dBm at 56,000 bps transmit and Receive Impedances 135 ohms nominal Data Format: Serial, synchronous, protocol-independent, binary data in full or half-duplex operation Operational modes of MCMP, TDM, AND Multipoint dail restoral bridge One - or Two - port sharing groups that provide up to 6 ports Automatic TDM reconfiguration to a reduced data rate upon entry into dail restoral mode Elastic store feature provides a buffer on each port to support digital or analog extended circuits Concurrent operation of TDM mode Multichannel Multipoint function that allows up to six non-disruptive, protocol independent data paths over a single multipoint circuit
Certifications & Standards
FCC Part 15 - Class A digital device FCC Part 68 - AW292J-61661-DD-N Listed UL 1950 Certified CSA C22.2, No. 220-M1986
2.13" Height x 7.63" Width x 13.40" Depth
90 V AC to 132 V AC
60 Hz ±3Hz
13.40 W Maximum
NETVIEW LPDA-2 Management SNMP
The COMSPHERE 3610 diagnostic control panel ASCII Terminal Interface allows an ASCII terminal full diagnostic and configuration control POINT-TO-POINT and MULTIPOINT Non-Disruptive diagnostics Integral 511 test-pattern generator and comparator Individual port tests and loopback
Multipoint / Point-to-Point
Sorry, you missed the deal!
This product is currently not available.
Promotions & Offers (1)
5% Back* Sitewide with Promo Code Rewardme
*See page for details