Be the first to review this item and earn 25 Rakuten Super Points™
The SNE2040G allows Carriers, ISPs and PTTs to deliver Ethernet services to virtually anywhere, using standard SHDSL circuits. The SNE2040G offers up to 9.2 Mbps of extremely reliable and efficient Ethernet service over the WAN, delivering the bandwidth required to support a sophisticated new generation of small and medium business customers.
The SNE2040G features four (4) SHDSL ports, each capable of up to 2.3 Mbps bandwidth, and can be connected directly to any 10/100 Mbps Ethernet port on a PC or LAN to extend Ethernet over simple twisted-wire pairs. The SNE2040G can be used in a point-to-point configuration with other SHDSL Network Extenders as well as with EtherXtend Ethernet in the First Mile (EFM) CPE, or it can be used to terminate SHDSL lines from both Zhone's MALC Multi-service Access Loop Carrier or the IPD4000E/12000E IP-DSLAM.
Dimensions 1.25in (3.2cm) High x 8.5in (21.6cm) Wide x 4.75in (12.1cm) Deep Weight 1.0 lbs (0.45 kg) Power 100-125VAC @ 0.15A200-240VAC @ 0.075A Interfaces 4 x SHDSL Hybrid RJ11/RJ45 (TC-PAM encoding)1 x 10/100 Ethernet RJ45 Bandwidth/Distance Up to 2.3 Mbps per SHDSL port (up to 9.2 Mbps loop bonded)Lower speeds supported up to 24,000 feet/7.3Km Operating Requirements Temperature: 32F to 122F (0C to 50C)Non-operating temperature: -40F to 158F (-40C to 70C)Humidity: 5% to 95%, non-condensingAltitude: -200ft to 16,500ft (-60m to 5,000m)