 |
KEY FEATURES: |
|
Product Color: White-Black-Silver |
|
100% digital signal for superior clarity and range |
|
H.264 signal encoding and decoding with 20-25 frames per second transmission |
|
Friendly On Screen Menu Display |
|
Supports up to 4 cameras |
|
Digital Audio and Video Recorder |
|
Take snapshots (pictures) |
|
User selectable Manual or Motion Detection Recording (4GB Memory Card and USB Card Reader Included) |
|
User selectable Motion Detection Alert (Monitor Beeps when Motion is Detected) |
|
View recorded video and Snapshots on the monitor |
|
Over 250 frequency-hopping sequences to minimize interference |
|
Digital security for complete privacy – neighbors cannot get audio or video from your camera(s) |
|
Wireless transmission range of approximately 600 feet (200 meters) line-of-sight (open area) |
|
Portable camera and monitor (with rechargeable batteries) |
|
Automatic infra-red night vision technology (approximately 10 feet night-vision range) |
|
Digital zoom with selectable regions |
|
Adjustable volume level |
|
Auto camera exposure |
|
Signal strength indicator |
|
Two transmission Modes: Audio & Video, and Audio Only |
|
Intelligent voice activity detector to lower noise and save power or battery |
|
Sleep mode with Voice Activation (VOX) to save power |
|
Set up to 5 alarm settings (e.g. use it to setup, up to 5 feeding or medicine-reminder alarms during a 24 hour period – repeat everyday) |
|
Multi-Language Support (English, French, German, Italian, Spanish) |
|
Both camera and monitor work with 3 different power sources; AC adapter, Computer’s USB port or 3.7V Li-ion battery (AC adapters & batteries and a USB cable included with the system) |
|
CAMERA: |
|
Wall-mounted or tabletop options |
|
8 Infra-red LEDs for night-vision – approximately 10 feet night vision range |
|
Noise-filtering microphone |
|
Manually swivel camera up-down and left-right when mounted on the stand |
|
Supply power using A-C adapter, computer’s USB port or 3.7V Li-ion battery |
|
MONITOR: |
|
Hand-held or tabletop use when used with the case-stand |
|
On-Screen Menu Display (OSD) |
|
Digital Clock w- up to 5 alarm settings (e.g. for feeding-medicine-reminder) |
|
Built in speaker |
|
Supply power A-C adapter, computer’s USB port or 3.7V Li-ion battery |
|
TECHNICAL SPECIFICATIONS: |
|
Supply Voltage: 5V DC, 1000mA AC adapters, computer’s USB port or 3.7V Li-ion battery |
|
Transmission Frequency: 2.4GHz (ISM band) |
|
Video Encoding and Decoding: H.264 |
|
Audio Encoding and Decoding: SPEEX |
|
Transmission Power: 20dBm |
|
Transmission Rate: 3Mbps |
|
Power Consumption: 350 to 400mA (Camera) – 300 to 350mA (Monitor) |
|
Audio Sampling Rate: 16kHz (16bit) |
|
Frequency Responds: 20Hz to 20kHz |
|
Camera Sensor and Resolution: CMOS and 640 x 480 (VGA) |
|
Monitor Type - Resolution: 3.2 inch TFT LCD and 320 x 240 pixels |
|
Video Frame Rate: 20-25 fps (Typical – with no interference) |
|
Total Harmonic Distortion: less than 0.05% |
|
Signal to Noise Ratio: greater than or equal to 75dB |
|
Receive Sensitivity: less than - 90dBm |
|
Battery Recharging: approximately 5 hrs with device powered off (not in use), 10 hrs with device powered on (in use) |
|
Battery Usage (Camera and Monitor): approximately 3 hrs – continuous use and approximately 4-6 hrs (with power save-audio only mode |
|
Memory Card: TF (Micro-SD) supports up to 32GB capacity |
|
INCLUDED IN THE PACKAGE: |
|
Monitor |
|
Camera |
|
A-C Adapters (2) – INPUT: 100V-240V 50-60Hz OUTPUT: 5V 1000mA |
|
Rechargeable Battery for the Monitor (camera has a built-in rechargeable battery) |
|
USB Cable |
|
Camera Stand-Wall Mount |
|
Monitor Stand |
|
4GB Memory Card and USB Card Reader |
|
OPTIONAL ACCESSORIES: |
|
Additional wireless camera HS-CA32RM |
